587215
11
Zoom out
Zoom in
Previous page
1/22
Next page
10
HOW TO OPERATE IN SILENT MODE
< WIRED REMOTE CONTROL >
1
In the timer mode, set the current day of the week
and current time.
See page 6 step 1 to 7
2
Press SET button for three seconds or more.
The remote control goes into silent mode setting and the following
is displayed.
” or ” (lights)
3 Press or button.
If button is pressed, is displayed.
If button is pressed,
is displayed.
Select “
”.
If you press the
RESET button, the remote control return to
the original screen.
4 Press SET button.
The following setting is displayed.
” (flashing)
” (lighting)
5 Press or button.
Set the “ON TIME”.
Set “Hour”
If you press or button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
Set “Minute”
If you press or button, the display increases or decreases
by ten minutes.
If you press the
RESET button, the remote control return to
the “
” display.
6 Press SET button.
The ON TIME is set and the following is displayed.
” (flashing)
” (lit for two seconds)
È
” (flashing)
” (lighting)
7 Press or button to set the duration.
Select OFF time.
When you press button, and the duration is increased by two
hours as below, “
Æ
Æ
Æ
When you press button, and the duration is decreased by two
hours.
If you press
RESET buttons, the remote control return to
the “ON TIME SET”.
8 Press SET button.
The setting is fixed and displayed.
” is displayed, and the silent mode setting ends.
The setting display turns off, and returns to original display.
3
5
7
2
4
6
8
1
When the silent mode is set, the unit operates more silently reducing noise from the outdoor unit.
The system applies the silent operation mode at the starting time to be set, and finish it after certain period has
passed.
Once the system is set to operate with the silent mode, the setting is applied everyday until it is canceled.
NOTICE
The remote control has main-sub units, silent setting
cannot be operated with sub unit .
After the silent mode is set, the following is displayed
for 3 seconds at the set time and the unit returns to
the original display.
At the ON time :
At the OFF time :
If you select ”, you can continue the
silent mode until it is canceled. At the first ON time,
the display shows “ ” for three seconds
and returns to original display.
JCanceling Silent Mode (Setting)
Select “ in step 2, press
SET button and silent setting is canceled
ending the silent mode.
is displayed.
SILENT MODE
JSilent Mode Setting
• If you press button while silent
mode is operative, silent mode is canceled
and the display will return to the original
display. Note that the setting which has not
been completed is canceled.
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
TIMER CANCELLATION MODE
2•4
7
1
3•5•6
In case ” , “ or ” Was
selected.
5 Press SET button.
The detailed setting of selected timer mode are displayed
as shown below.
(But if not set, “
” is displayed)
<Display EXAMPLE when
” is selected>
If you would like to quit cancellation, press the RESET
button to return to the “
” display. (step 4 above)
6 Press SET button.
The display of the detailed timer setting is turned off, and
after the message “
” is displayed for two seconds,
” is displayed again. (step 4 above)
Repeat steps 4 to 6 to continue canceling timer mode settings.
In case was selected.
All the Weekly timer setting will be canceled if you proceed the
following steps.
To cancel a part of the timer setting, please see “Weekly timer
Mode Setting Canceling” on page 9.
5 Press SET button.
The settings are displayed as shown below.
(But if not set, “
” is displayed)
If you would like to quit cancellation, press the RESET
button to return to the “
” display. (step 4 above)
6 Press SET button to confimn.
The day of the week display area turns off, and after the
message “
” is displayed for two seconds, and the
display returns to “
”. (step 4 above)
By this operation settings, for all days of the week are canceled.
1 Press TIMER button.
Timer mode begins.
The current “The day of the week” and “the current time” are
displayed.
[
]
2 Press button for five times.
È
” ( first press)
È
” ( second press)
È
” ( third press)
È
” ( fourth press)
È
” ( fourth press)
3 Press SET button.
Timer Cancellation Mode begins.
4 Press or button.
By pressing or button, it is possible to choose the item to cancel.
” (canceling all days of the week)
Press button, and the displays is switched upwards.
If you press the
RESET button, the remote control will
return to the previous screen, and display ”.
(step 2 above)
7 Press ON/OFF button.
Timer mode ends.
If you press button while timer mode is
operative, timer mode is canceled and the display
will return to the original display.
If you do not press any button for several minutes
after entering the timer mode, the timer mode ends
and returns to the original display.
ATTENTION
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FDQS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FDQS in the language / languages: English as an attachment in your email.

The manual is 10,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FDQS

Mitsubishi FDQS User Manual - German - 22 pages

Mitsubishi FDQS User Manual - Dutch - pages

Mitsubishi FDQS User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info