493665
23
Zoom out
Zoom in
Previous page
1/29
Next page
EN-23
8. ProjectorView
8.3. Entering projector information
(1) Click [SETUP] in the ProjectorView main window (PROJECTOR INFORMATION).
• Setupwindowisdisplayed.
<Note>
• BesuretoenterdatawithinveminutesaftertheSetupwindowisdisplayed.ClickOKtosavechanges.
The connection will turn off in five minutes after the window is displayed so you need to go back to the
mainwindow(PROJECTORINFORMATION)toaccesstheSetupwindow.
(2) Enter data in each field, set Alert e-mail service to ON or OFF, choose Language between
Japanese and English, set PJLink certification setting to ON or OFF, specify Password
setting, and choose to [RESET] Network setting reset.
<Note>
• WhenyouchangetheLanguagesetting,besuretorestarttheProjectorViewforthechangestotakeeffect.
Thefollowingtableexplainseachitem.
Item Description
Projector name Enter a unique name to identity the projector.
Installeddate*
1
Enter the date when the projector is installed.
Installedlocation*
1
Enter the place where the projector is located.
SMTPIPaddress*
2
Enter the IP address of the SMTP server used for sending e-mails.
(e.g.19 2.16 8.0.1)
E-mailaddress*
1
Enter the E-mail address to receive alert messages.
(e.g.administrator@xxx.xxx.xxx)(Upto64alphanumericalcharacters)
E-mailfrom*
1
Enterthesenderofalertmessages.(e.g.PJView@xxx.xxx.xxx)
Last lamp replaced date
*1
Enter the date when the last change of lamp was made.
Lastmaintenancedate*
1
Enter the date when the last maintenance was done.
Alert e-mail service Choose whether to send alert messages.
Language ChoosethedisplaylanguageofProjectorView(JapaneseorEnglish).
PJLinkcerticationsetting ChoosewhethertosetthePJLinkcerticationsetting.
Password setting Click [PASSWORD] to access the network password setting window. (For
details, see “8.4. Setting the network password”.)
Network setting reset Click [RESET] to access the network settings reset window. (For details, see
“8.5. Resetting the network settings”.)
*
1
 Fordataentry,usesingle-bytealphanumericalcharactersandsymbols(+-/=*_!?.,:;#$%&()|<>[]{
}"' @ ).
*
2
For data entry, use single-byte number characters and symbol ( . ).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FD730U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FD730U in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FD730U

Mitsubishi FD730U User Manual - English - 48 pages

Mitsubishi FD730U User Manual - English - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info