493665
15
Zoom out
Zoom in
Previous page
1/29
Next page
EN-15
5. Operation of projector
5.2. Confirmation of projector status
The status of the projector is displayed on the projector list on the main screen.
Item Description
Check Theftdetectorsetting(ON/OFF)
No. Projector list registration number
Projector Name Projector name set in the application
MAC Address MAC address of the projector
IP Address IP address of the projector
Power Powersupplystatusoftheprojector(ON/OFF)
InputSource*
1
Inputsignaloftheprojector(COMPUTER1/COMPUTER2/VIDEO/S-VIDEO/
HDMI(HDMI1/HDMI2)/DVI-D/SDI/PCLessPresentation/USBDisplay/LAN
Display/COMPONENT)
AVMute Mutestatusoftheprojector(ON/OFF)
Lamp1/2Time(Low) Lampilluminatingtime(HHHH:MM)
In the case of the projector equipped with two lamps, illuminating time for
the lamp 1 is displayed in the left side and illuminating time for the lamp 2 is
displayed in the right side.
Group Name The belonging group of projector
*
1
HDMI and DVI-D are displayed with DIGITAL 1 or DIGITAL 2 by a connected projector.
• Theprojectorstatusisre-obtained(refreshed)automaticallyandperiodically,butthepresentstatuscan
also be obtained by the user’s instruction. When clicking [Refresh Status] of the tool bar on the main screen,
Power,InputSource,AVMute,andLamp1/2Time(Low)statusofeachprojectorisre-obtained.
• ThestatusofInputSourceandAVMutewillnotbeobtainedunderthefollowingconditions:
- when the projector is powered off
- during warm-up or cool-down.
• Whenclickingthestatustagoftheprojectorlist(excepttheMACaddress),thelistcanberearranged(sorted).
The list can be rearranged in reversed order by pressing one more time.
• Whenclicking[SelectAll]ofthetoolbar,allprojectorsintheprojectorlistbecomeselected/nonselected
state.
• Ifanyabnormalstateoftheprojectorisdetectedbyacquiringtheprojectorstatus,anerrormessagewillbe
displayed on the error message display column at the lower part of the screen.
<Note>
• Thedefaultcycleoftheautomaticre-acquisitionis10minutes.Tochangethiscycle,see“3.1.System
settings.”
• Whenmultipleprojectorsareconnected,itmaytaketimetoacquirethestatus.Duringacquiringthestatus,
the status bar at the lower part of the main screen becomes “Getting status..., and it becomes “Done” when
the acquisition has been completed.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FD730U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FD730U in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FD730U

Mitsubishi FD730U User Manual - English - 48 pages

Mitsubishi FD730U User Manual - English - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info