549871
39
Zoom out
Zoom in
Previous page
1/59
Next page
EN-39
ENGLISH
About PJLink™
To use PJLink™ function, the PJLink™ application software is required.
For the specifications of PJLink™, access to the Web site of Japan Business Machine and Information System
Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands
defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ standard specifications
Version 1.0.
Utilizing the password function
To prevent unauthorized connection to the projector via PJLink™ application, the projector includes an option for
setting up password security. To set the password:
1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > LAN Control Settings menu. Press
MODE/ENTER. The LAN Control Settings page is displayed.
2. Highlight PJLink Certification and select On by pressing / . The default password is "admin".
3. Press to highlight Change PJLink Password and press MODE/ENTER.
4. Enter the current password. Press , to select the digit and press , to select from 0-9, A-Z, a-z or
symbols. Press MODE/ENTER to confirm.
5. Enter the new password and Press MODE/ENTER to confirm.
If you forget the password, please use the password "projectorcontroller".
PJLink supported commands
The table below shows commands to control the projector using the PJLink™ protocol.
Commend Description Remark (Parameter)
POWR Power control
0 = Standby
1 = Power on
POWR? Inquiry about the power state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
INPT Input switching 11 = COMPUTER1
12 = COMPUTER2
21 = VIDEO
22 = S-VIDEO
31 = HDMI
INPT? Inquiry about input switching
AVMT Mute control 10 = BLANK disable
11 = BLANK enable
20 = Audio mute disable
21 = Audio mute enable
30 = BLANK and audio mute disable
31 = BLANK and audio mute enable
AVMT? Inquiry about the mute state
ERST? Inquiry about the error state
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 or 2
3rd byte: Temperature error, 0 or 2
4th byte: Always 0
5th byte: Always 0
6th byte: Always 0
* 0 or 2 mean as follows:
0 = No error detected, 2 = Error
LAMP? Inquiry about the lamp state
1st value (1 to 4 digits): Cumulative lamp operating time
(This item shows a lamp operating time (hour) calculated
based on that Lamp Mode is Low.)
2nd value: 0 = Lamp off, 1 = Lamp on
INST? Inquiry about the available inputs
The following value is returned.
"11 12 21 22 31"
NAME? Inquiry about the projector name
The command responds with the projector name specified in
the Tools page.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi EX241U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi EX241U in the language / languages: English as an attachment in your email.

The manual is 5,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info