493683
41
Zoom out
Zoom in
Previous page
1/55
Next page
EN-41
ENGLISH
FUNCTION DESCRIPTION
Presentation Timer
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 29 for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 20 for details.
Projector Position
See "Choosing a location" on page 11 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 44 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 30 for details.
Panel Key Lock
Disables or enables all panel key functions except POWER on the
projector and keys on the remote control. See "Locking control keys"
on page 30 for details.
Timer Controller
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Splash Screen
Allows you to select which logo screen will be displayed during
projector start-up. Three options are available: MITSUBISHI logo,
Black screen, or Blue screen.
Quick Cooling
Selecting On enables the function and the projector cooling time will be
shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
Audio Settings
See "Adjusting the sound" on page 30 for details.
Standby Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER-1 and
MONITOR OUT jacks are correctly connected to devices. See
"Connecting a monitor" on page 15 for how to make the
connection.
Enabling this function slightly increases the standby power
consumption.
Menu Settings
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position
Sets the On-Screen Display (OSD) menu position.
Lamp Settings
Lamp mode
See "Setting Lamp mode as Low" on page 44 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 47 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 44 for details on how
the total lamp hour is calculated.
4. SYSTEM SETUP: Basic menu
I
I
5. SYSTEM SETUP: Advanced menu
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi EW270U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi EW270U in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info