475244
14
Zoom out
Zoom in
Previous page
1/40
Next page
14
EN
1L25
PLAYING A DVD VIDEO
OR AN AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1 Press the POWER button.
¡The power will turn on.
2 Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3 Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct
recess, with the label side up. Discs that are
irregularly shaped, contain a scratch protection film,
or have any type of sticker or adhesive label should
not be inserted.
4 Press the PLAY button.
¡The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
You need to press the PLAY button only when the
tray has been closed by pressing the OPEN/CLOSE
button.
¡When you playback a DVD Video and DVD Audio
or Video CD which a title menu is recorded, it may
appear on the screen. In this case, refer to USING
THE TITLE MENU.
5 Press the STOP button to stop play.
Notes
¡A prohibited icon may appear
at the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
VCDCDDVD-RWDVD-V
DVD-A
¡If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback. Never attempt to play a cracked or broken
disc !
¡With DVD Videos that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
¡During the playback of a common two layered disc,
pictures may stop for a moment. This happens when
the 1st layer switches to the 2nd layer. This is not a
malfunction, and is commonly found on pre-recorded
discs.
¡During the playback of DVD-RW recorded in VR
mode, the sound or picture may freeze momentarily
depending on the writing conditions of discs.
¡Operation may vary when you playback DVDs with
a disc menu or Video CDs with PBC. Refer to the
manual accompanying the disc for details.
¡When you playback Video CDs with PBC, the time
counter does not appear on the display.
Cancelling PBC (for playback of a Video CD)
1. Insert a Video CD (Playback will start
automatically).
2. Press the STOP button.
3. Enter track number of your choice with the numeric
buttons.
4. PBC is now cancelled and the playback of the Video
CD will start.
PLAYING A DISC
USING THE DVD MENUS
Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.
1 Press the MENU button.
¡The DVD menu will appear.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
DVD-V
E5733UD.qxp 03.5.12 3:01 PM Page 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi DD-8040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi DD-8040 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info