515884
13
Zoom out
Zoom in
Previous page
1/17
Next page
EN-13
Basic operation
Power ON procedures
1. Turn the Main Power Switch on the rear of the product to ON to turn on the main
power.
The power lamp blinks green and then illuminates red. (You cannot turn on the power
while the lamp is blinking green.)
2. Press the power (
) button to turn on the power.
The power lamp illuminates green.
3. Turn on the power of the other equipment.
CAUTION:
This monitor has the sensors to detect errors in the power, fan, temperature, and memory. When an error occurs, the power lamp
illuminates. (See page 11.)
Power OFF procedures
1. Press the power (
) button to turn off the power.
The power lamp illuminates in red.
2. Turn the Main Power Switch to the OFF mode.
The power lamp goes out.
NOTE:
For safety, unplug the power cord from the outlet.
Image persistence
Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs
when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ im-
age persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate
image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
NOTE:
As with all personal display devices, we recommends displaying moving images and using a moving screen saver at regular inter-
vals whenever the screen is idle or turning off the monitor when not in use.
Control by computer
You can control this product using the control utility software installed on a personal computer to make settings such as picture qual-
ity adjustment. For the usage of the control utility software, see its operation manual.
The control utility software and its operation manual are included on the CD-ROM that is supplied with the product.
To view the operation manual of the control utility software, follow the steps below.
1. Insert the CD-ROM supplied with the product into the CD-ROM drive.
2. Open the 56PQF60LC folder from the CD-ROM.
3. Double-click the Index.pdf icon.
4. Select a language for the operation manual.
Acrobat Reader/Adobe Reader is required to view the operation manual of the control utility software. If you don’t have it on your
computer, you can download and install it from the Adobe website.
ON
OFF
Main Power Switch
(Rear panel)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi 56P-QF60LCU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi 56P-QF60LCU in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info