515884
9
Zoom out
Zoom in
Previous page
1/17
Next page
EN-9
To use the product for a long time, you are recommended to follow the
instructions below.
You can change the settings of the product using the accessory application software “QF60LC_Control.”
For details of the application software, see the QF60LC_Control software operation manual.
Turn off the product when it is not used.
Turn off the product using the POWER button when it is not used.
1. Set the power saving function to ON. The factory default is ON.
The power saving mode is automatically activated when no signal is input.
[Control application]
[OPERATION] [POWER SAVE] ON/OFF
2. Use the off-timer function.
The product is automatically turned off after a lapse of the time you set.
[Control application]
[OPERATION] [OFF TIMER] OFF, 1 to 24
Keep the temperature of the product as low as possible.
By keeping the temperature of the product low, the load to the LCD panel can be reduced.
1. Cooling fan
You can control the rotation speed of the built-in cooling fan.
When FULL is selected, the cooling fan always rotates at a high speed, increasing the effect of lowering the temperature of
the product.
The factory default is NORMAL. When the temperature inside the product exceeds a certain level, the cooling fan changes
the rotation speed from Low to High.
[Control application]
[CONFIGURATION] [FAN MODE] NORMAL/FULL
2. Bright mode
You can adjust the brightness of the screen.
When NORMAL is selected, the brightness is automatically lowered (to 80%), reducing the heat generation of the product.
The factory default is NORMAL.
When HIGH is selected, the brightness is set to 100%.
[Control application]
[CONFIGURATION] [BRIGHT MODE] NORMAL/BRIGHT
Tips
Decrease the brightness to reduce the heat generation of the product. The factory default is 100.
[Control application]
[PICTURE] [BRIGHTNESS] 0 to 100
Keep the ambient temperature low and install the product in a well-ventilated place.
Display different images and moving images regularly and avoid displaying the same image for a long time.
Display images on the full screen. If black areas with no image exist on the screen for a long time when images having differ-
ent resolution and aspect ratio are displayed, the afterimages of the boundaries between images may be left on the screen after
displayed images are changed.
For longer use
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi 56P-QF60LCU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi 56P-QF60LCU in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info