517623
56
Zoom out
Zoom in
Previous page
1/60
Next page
5603 Wireless Handset User Guide
50
The easy replacement procedure is done via the handset display and the 5603/4 Programmer
or the 5603/4 Rack Charger.
The following settings are replaced during easy replacement:
DECT registration
User parameters (including User ID)
Contacts
The extension number is assigned to the new handset.
The following settings are not replaced during the easy replacement:
Call list
Before Starting Easy Replacement Procedure
1. Check that both the old handset (that is, the handset to be replaced) and the new handset
(that is, the replacement handset) are of the same device type (5603).
2. Make sure that the handset batteries are charged before starting the easy replacement
procedure.
3. Switch off the new handset by long pressing .
Easy Replacement Procedure
During the Easy Replacement procedure, the LEDs of the handset and the charger follow the
same LED indications. This means that if the old handset has a broken display, the LED
indications on the charger and on the handset can be used to follow the replacement procedure.
Before and after easy replacement, the LEDs may have different LED indications. For more
details, see also“LED Indications during Easy Replacement” on page 52.
IMPORTANT:Never remove a handset from the charger until the instructions in the
display or the LED tells you to do so (see status on the LED if the display is broken). If
there is an error indication, it may be allowed to remove the handset, see
“Troubleshooting” on page 45 for further instructions.
After the old handset has been in the charger, the new handset needs to be placed in
the charger regardless if the replacement was successful or not. Failing to do so may
result in malfunction and the new handset will need to be sent for service.
Note: It is possible to perform Easy Replacement between different product licenses
(that is; Basic and Advanced). The new handset’s product license is not replaced by the
old handset’s variant license during the procedure
1
.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitel 5603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitel 5603 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitel 5603

Mitel 5603 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info