475382
11
Zoom out
Zoom in
Previous page
1/58
Next page
Mitel 5312/5324 IP Phones User Guide
About Feature Access Codes
Use of some features requires dialing access codes. Ask your Administrator for a list of codes
you should use.
For Users on Resilient Mitel Communications Director (MCD)
Systems
If during a call, you hear two beeps repeated every 20 seconds it means that your phone is
switching to a secondary MCD system. The call continues but some of the keys and features
on your phone function differently. The keys and most features begin working normally again
after you hang up. If your phone switches to the secondary system while your speaker or
handset is muted (that is, while the
MUTE light is on), the call remains muted until you
hang up. Normal operation resumes when your phone switches back to the primary system. If
your phone is idle and switched to the secondary system, you'll see a flashing rectangle on
the display. The rectangle remains until the switch to the primary system is complete.
Line Interface Module
The Line Interface Module is an optional device that adds an analog phone line (POTS)
capability to your 5324 IP phone only. If Emergency Call Routing is not programmed on your
MCD, you must use the Line Interface Module to dial emergency calls. For more information
on emergency number dialing, refer to Emergency Calls. If you have a Line Interface Module
connected to your 5324 IP Phone, all programming of the Line Interface Module, except the
Analog Key, is done by the Installer when your phone is installed. For more information, refer
to "Using the Line Interface Module" elsewhere in this guide.
Note: The 5312 IP Phone does not support the Line Interface Module.
- 5 -
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitel 5312 IP- Communications Director at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitel 5312 IP- Communications Director in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitel 5312 IP- Communications Director

Mitel 5312 IP- Communications Director User Manual - German - 54 pages

Mitel 5312 IP- Communications Director User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info