512351
5
Zoom out
Zoom in
Previous page
1/22
Next page
5
CAUTION: For optimal performance of the lithium battery, note the following:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
The battery will stop charging when the ambient temperature is less than -10ºC (14ºF)
or more than 60ºC (140ºF).
Recharge the battery when it is nearly discharged. When recharging, make sure that
the battery is fully charged. Doing so can extend the battery life.
If you will not use the product for a long period of time (over one month) or find the
discharge/recharge time has been shortened, be sure to fully discharge the battery
first before recharging it. You are also advised to fully discharge and recharge the
battery once every 1~2 months.
Failure to follow the battery usage instructions could cause damage to your device,
battery and even bodily injury or property damage and will void the warranty.
Performing the initial start-up
1. Mount the device and accessories on to your bike. For more information, see
the “Installing the device” section.
2. Press and hold the POWER button for 2 seconds to turn your device on.
2 sec
2 sec
3. Follow the prompts to personalise your device, including:
• Select your preferred language
• select the coordination format: degree or degree/minute/second
• select the units format: imperial or metric
• set up date and time format, including the correct time zone and daylight
saving function
• set up your profile, including gender, birthday, weight, height, and
workout level
• select your bike type (race, city, or mountain) and complete the bike’s
data (weight and wheel size*)
* For selected models only.
Tip: You will only have to do this the first time you use your Mio. You can change these
settings from the SETTINGS menu while using the device.
4. Once your device is turned on, it will search for satellite signals
automatically. This may take several seconds depending on the location.
When GPS is fixed, the GPS signal icon ( ) on the screen indicates the
GPS status.
5. Depending on your device model, you will need to scan and pair the heart
rate monitor and cadence/speed sensor with the device. After installing the
cadence/speed sensor and heart rate monitor, enable the device to scan
them from Main menu > SETTINGS > ACCESSORIES > SENSORS.
Connecting your device to the computer
1. Turn on the computer.
2. Turn on your device. Connect the mini-USB end of the USB cable to the back
of your device and the other end to a USB port on your computer.
3. When prompted, select the desired connection type from the CONNECT TO
PC message window:
a
b
1
2
3
• YES: Your device will be connected to the computer so you can transfer
your training data to the computer and upgrade your device (when
update is available) via Mio Share.
Tip: For more information about using Mio Share, see the "Managing data on the
device" section.
• NO: You will be able to continue using your device with the battery in
charging mode via the computer.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mio Cyclo 100 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mio Cyclo 100 series in the language / languages: English as an attachment in your email.

The manual is 7,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mio Cyclo 100 series

Mio Cyclo 100 series User Manual - German - 22 pages

Mio Cyclo 100 series User Manual - Dutch - 22 pages

Mio Cyclo 100 series User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info