Manual Minox WINDWATCH PRO II (page 68 of 79) (English, German, French)

459725

Zoom out

Zoom in

1/79

WINDWATCH PRO, il a été essayé d’intégrer cet arrangement

dans un boîtier de sacoche. Le petit orifice avec les 3 contre-

fiches de protection sert à canaliser le vent et pour le laisser

circuler autour du capteur. Le capteur est découplé de façon

thermique, autant que faire se peut dans un boîtier serré. De

ce fait, et en vue d’obtenir le mesurage de température rapide

et précis, il est conseillé de tenir l’instrument à coulisseau

ouvert dans la direction du vent. En cas d’accalmie il devra

être balancé quelques fois, ou bien tourné dans l’air au bout

d’une ficelle. Si le boîtier n’a pas encore adopté la tempéra-

ture ambiante, vous constaterez qu’aprés l’avoir balancé, la

température ne sera ni montée, ni descendue; et ce selon le

boîtier est plus chaud ou plus froid que son environnement.

Mesurage d’humidité

Le capteur d’humidité interne et numériquement équilibré

mesure l’humidité relative. Cependant cette humidité rela

tive dépend fortement de la température du capteur. Etant

donné que la température est influencée par le boîtier, il est

nécessaire de compenser par électronique la différence entre

temperature de boîtier et de l’environnement. Ceci est réalisé

par le petit capteur de température placé dans l’orifice. Le

mesurage d’humidité sera d’autant plus précis et plus rapide

que le capteur de température peut détecter son environne-

ment (voir ci-dessus).

this setup into a bag housing. The small opening with 3

protective ribs is used to channelise the wind and to direct

its flow at the sensor. The sensor is thermally decoupled

as far as is possible inside a narrow housing. In order to

obtain a precise and rapid temperature measuring it is

recommended to hold the instrument into the wind with

open slider, or in case of calm to move it to and fro a few

times, or to swirl it around in the air with its cord. If the

housing has not yet adopted the ambient temperature you

will note that after the swirling around the temperature will

neither raise nor be reduced, depending on whether the

housing is warmer or cooler than the environment.

Humidity Measurement

The internal digitally preadjusted humidity sensor measures

the Relative Humidity. However, this relative humidity is

highly depending on the sensor temperature. Due to the

fact that this temperature is influenced by the housing, the

difference between temperature of housing and ambient

temperature needs to be compensated electronically. The

small sensor positioned directly in the opening is used for

this purpose. The humidity measuring will be effected so

much more precise and also rapid, as the temperature sen

sor can measure the environment (see above).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Minox WINDWATCH PRO II in the language / languages: English, German, French as an attachment in your email.

The manual is 2,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Minox WINDWATCH PRO II Manual

Product: