625816

Minox DTC 700 Manual

35
Zoom out
Zoom in
Previous page
1/60
Next page
35
Temperature Unit
This function allows you to set either Fahrenheit or
Celsius as the unit of temperature. Go to the “Main
Menu” by pressing the menu button (8) and select
the menu option Temperature Unit”. It is located
under the second tab “General Settings”. You can
access the submenu by pressing the OK button (9)
or the right arrow key (10). Press the Up/Down ar-
row key (10) in the submenu to select either the
Celsius or Fahrenheit option. Press the OK button
(9) to save the settings to return to the menu option
“General Settings”.You can return to the previous
menu option without changing the settings by pres-
sing the left arrow key (10).
Power source
Your DTC 700 trail camera is a high precision de-
vice of premium technical quality. It is strongly re-
commended that you use premium quality alkaline,
lithium or NiMH batteries. In order to select the bat-
tery type, go to the “Main Menu” by pressing the
menu button (8) and select the menu option “Po-
wer source”. This is located under the second tab
“General settings”. You can access the submenu
by pressing the OK button (9) or the right arrow
key (10). Now select your battery type by choosing
between lithium, alkaline and NiMH batteries by
pressing the Up/Down arrow key (10). In addition,
you can select an external power source. For that,
select 6V.
Formatting the memory card
Formatting the memory card will delete all data
on the memory card and will prepare the memory
card for use in the camera. It is recommended that
you format the memory card before each use. Go
to the “Main Menu” by pressing the menu button
(8) and select the option “Format SD card”. This is
located under the second tab “General Settings”.
You can access the submenu by pressing the OK
button (9) or the right arrow key (10). Select “Yes”
if you would like to format the SD card or “No” and
the memory card will not be formatted. Press the
OK button (9) to save the settings. The camera will
automatically revert to the Start Menu. By pressing
the left arrow key (10), you will be returned to the
previous menu option and no formatting will be
undertaken.
Password
This function allows you to enter a 4-digit number
combination in order to prevent the theft of your
DTC 700 camera. You will not be able to access the
“SETUP” option (Main Switch (11) centre) for the
camera without entering the number combination.
Go to the “Main Menu” by pressing the menu but-
ton (8) and select “Password”. This is located under
the second tab “General Settings”. You can access
the submenu by pressing the OK button (9) or the
right arrow key (10). You can choose a number
combination in the sub menu after selecting “Enter
password”. For that, confirm this menu option with
OK (9).
Entering the password
Enter the desired number combination (0-9) in each
field using the Up/Down arrow keys, and using the
right/left arrow keys you can control the individual
fields of the number combination. Once you enter
the entire combination, press the OK button (9) to
save. Pressing the menu button (8) has the same
effect as saving with OK (9). Even here, the pass-
word is accepted and you return to the menu option
“General Settings”.
Deactivating the password
Select the menu option “Password” in the “Main
Menu”, which you can retrieve by pressing the
menu button (8). This is located under the se-
cond tab “General Settings”. You can access the
submenu by pressing the OK button (9) or the
right arrow key (10). You can delete your number
combination under “Deactivate” in the submenu.
Use the Up/Down arrow keys (10) to navigate in
the submenu. Press OK (9) to delete your number
combination. You can return to the previous menu
selection by pressing the left arrow key (10) without
changing the password.
Note:
Choose alkaline if using lithium batteries.
Press the OK button (9) to save the settings. The
camera will automatically return to the Start menu.
You will return to the previous menu without any
changes to the settings by pressing the left arrow
key (10).
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minox DTC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minox DTC 700 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info