Manual Minox DTC 700 (page 32 of 60) (English, German, French)

625816

Zoom out

Zoom in

1/60

Video length

Go to the “Main Menu” by pressing the menu but-

ton (8) and select the menu option “Video Length”.

This is located under the ﬁrst tab “Camera Set-

tings”. You can access the submenu by pressing the

OK button (9) or the right arrow key (10). Enter the

desired video length (5-30s.) using the Up/Down

arrow key (10) and press the OK button (9) to save

the settings. The camera will automatically return to

the menu option “Camera Settings”. You can return

to the previous menu optionwithout changing the

settings by pressing the left arrow key (10).

Video sound

This function allows you to decide whether to re-

cord the sound when shooting a video or not. Use

the Menu button (8) to select the Menu item „Vi-

deo sound“ from the Main Menu. This is under the

ﬁrst tab „Camera settings“. Press the OK button (9)

or the right arrow key (10) to access the Sub-menu.

With the Up/Down arrow keys (10) you can now

select whether to record the sound or not. Select

„On“ for video shooting with sound or „Off“ for

video shooting without sound. Press the OK button

(9) to save the setting; this returns you to the „Ca-

mera settings“ menu item. Use the left arrow key

(10) to return to the higher menu without changing

the settings.

Shutter lag

This function allows you to specify the length of

the time between two pictures when your came-

ra does not respond to movement. The options for

programming the sequential shooting intervals

extend from 1 second to 60 minutes.Go to “Main

Menu” by pressing the menu button (8) and select

the menu option “Shutter Lag”. This can be found

under the tab “Camera Settings”. You can return to

the submenu by pressing the OK button (9) or the

right arrow key (10). In the submenu, choose the

desired time interval using the On/ Off arrow keys

(10). Press the OK button (9) to save the settingand

to return to the menu option “Camera Settings”.

By pressing the left arrow key (10), you can return

to the previous menu selection without changing

the settings.

Trigger mode

This function allows you to decide the trigger speed

for the DTC 700. When movement is detected, the

camera triggers in less than a second in battery

operation. For this it has to ‚wake up‘ from the

stand-by mode. If you are using the camera with

an external power source, you can set the DTC 700

so that stand-by mode is never selected. This means

that the camera does not need to ‚wake up‘ when

there is movement and triggers instantaneously.

Use the Menu button (8) to access the Main Menu

and select „Trigger mode“. This is under the ﬁrst

„Camera settings“ tab. Press the OK button (9) or

the right arrow key (10) to access the Sub-menu.

In the Sub-menu you can set the required trigger

mode with the Up/Down arrow keys (10). Select

„Normal“ for battery operation (< 1 sec.) and „Po-

wer“ for operating with an external power source

(instantaneous). Press the OK button (9) to save

the setting and this will return you to the „Camera

settings“ menu item. Use the left arrow key (10)

to return to the higher menu without changing the

settings.

Illumination

Your DTC 700 cannot access external illumination;

please always select “Internal”. Should you nevert-

heless select “External”, the ﬂash will remain deac-

tivated even in the dark and you will get only black

pictures at night.

PIR [Passive Infrared] Sensor: Setting the

responsivity of the IR sensor

Your MINOX DTC 700 allows you the possibility of

adjusting the responsivity of the IR sensor at three

levels – low, normal, and high. This function is ef-

fective, for instance, for reducing the possibility of

an inadvertent activation of the camera through

movements of non-relevant objects, such as the

branches and grass. In order to set the responsi-

vity of the IR sensor to your DRC 700, please go

to the “Main Menu” by pressing menu button (8)

Note:

Please use the ‚Power‘ Trigger mode

only when the camera is connected by a mains

adaptor to the power supply system. In battery

operation this setting will exhaust the batteries

in a very short time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Minox DTC 700 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Minox DTC 700 Manual

Product: