651512
21
Zoom out
Zoom in
Previous page
1/43
Next page
4140
5. Press the OK button (11).
6. Using the down arrow key (11), choose the language
you would like to use (highlighted in black).
7. Press the OK button (11).
8. The camera returns to the “Main menu”. The l
anguage is now set to the one you have selected.
Mounting the camera
On the outer casing of the camera there are two strap
mounts (17) attached to each side which can be used to
mount the camera. The mounting straps included in the
delivery are fed through the strap mounts (17). The cam-
era is fastened with the latches on the mounting straps.
Additionally, the camera can be secured using standard
cables by feeding them through the eyelets provided (18).
Setup and operating mode
Your camera has two mode settings:
1. Setup mode
Switch your DTC 450 camera to the “Setup mode” (SETUP
= setup mode, main switch (12) in top position). In this set-
ting you can adjust the programming of the camera as well
as all display settings such as date, time, temperature etc.
that are to be later displayed on the photos or video clips.
2. Operation mode
Switch your DTC 450 camera to “operating mode” (ON =
operation mode, main switch (12) in bottom position). In
this mode, your DTC 450 camera automatically accepts
the new settings which you previously programmed in
the “Setup mode.
Note: The red activating LED (5) will blink for a few
seconds before the camera is ready for use and you
will see the actual shooting area on the display screen.
Menu functions and settings
Preview
In the main menu, go to the menu option “Live Preview”
and press the OK button (11). This option allows you to
display a current image on the LCD display (6) of your
DTC 450 camera (3). The function is useful for alignment
of the DTC 450, since you can identify the shooting area
when you are not directly in front of the lens (3). In the
LCD display (6), the following is displayed: The battery
status symbol and the symbol for the inserted SD card
are indicated on the top right area. If the SD card is not
inserted, your DTC 450 reports the “No SD card” message
when you switch to setup or operating mode. Press the
menu button (13) to access the main menu again.
Playback photo/video
In the main menu, go to the menu option “Playback
photo/video” and press the OK button (11). The number
of photos or video recordings is displayed in the LCD
screen (6). If the shot is a video, the play symbol, cam-
era symbol and stop symbol will be displayed in the top
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minox DTC 450 SLIM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minox DTC 450 SLIM in the language / languages: English, German, French as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info