43
Connecting your camera
to the computer
Always switch the DSC on before connecting it
to the computer. Then connect the camera to the
computer using the provided USB cable (connect
the smaller connector to the camera and the
larger one to the computer.)
When connecting the MINOX DSC to your compu-
ter for the fi rst time the computer will recognize
it as new hardware. You computer automatically
installs the drivers. Wait until your computer in-
forms you that installation has been completed
before trying to access the images or video clips
stored in the camera or on the microSD card.
Note: If there is a microSD card installed in the
camera you can only access the data on this card.
To access any data in the internal memory of the
camera you must fi rst remove the SD card.
Transferring images to a Windows PC
Click on the symbol
My Computer
on your com-
puter. You will see a symbol with the designation
Removable media. Double click on the symbol and
open the folder
DCIM
and then folder
100_ICAM
in which all your images are stored.
Transferring images to an Apple Mac
After connecting and switching on the camera a
new hard drive system appears on your desktop
with the designation
MINOX
. On this hard drive
you will fi nd a folder
DCIM
, and in this folder
another folder
100_ICAM
with all your images
and video clips. You can rename the hard drive
MINOX to any name you choose.
Note: You can also use your camera to store or
download other fi les. To do this, open the above
mentioned folder and copy the respective fi le into
this folder to save it in the camera memory.
