36
“unlock”. Now carefully press with a fi nger on one
of the two engaging notches (top or bottom) be-
tween the two devices. This disengages the lock-
ing action of the fl ash module with the camera.
Note: Before connecting the external fl ash with
the camera you must remove the safety chain
from the camera (DSC), if attached.
Switching on the MINOX DSC
To switch the DSC on press the On/Off button
and hold it down until the LED lights up blue (in
the Photo/Video mode) or green (in the Playback
mode).
The switching on of the DSC takes effect with a
delay of a few seconds to avoid any unintentional
switching on of the MINOX DSC.
Using Flash/Display Unit
The followings operations can only be done af-
ter the Flash Unit is connected to the Spycam
properly. Otherwise the Flash Unit is in power-
off state.
Switch On the Display
Switch the Display On/Off button to the ON side
and switch on the Spycam. You can see the pre-
view on the Display.