23
Uninstalling WebCam driver (for Windows 98SE/ME/2000/XP)
Please follow the instructions given below to uninstall your
software:
1. Switch on your PC.
2. Press the Power On/Off button to switch on the DD100.
3. Actuate the "Mode button" twice to access the setup
mode.
4. Using the
ᮡ
/T button (up) and the
ᮢ
/W button (down)
you can move around the menu selection. Select the
function "Webcam” and confirm with the "OK/ Menu
button". The WebCam image appears on the monitor
(TFT).
5. Connect the DD100 to your PC using the provided USB
cable.
6. Start up Windows.
7. Double click on "My Computer" on your Desktop.
8. Double clock on "Control Panel" and "System/Hardware".
9. Open the "Device Manager" and select "Image Device".
10. Select "Coach Video Camera" and press "Delete".
11. Select "Coach Digital Camera" and press "Delete ".
Note:
Make sure that your DD100 is connected to the PC and is in
"WebCam" mode.. Otherwise the "Device Manager" will
not find any "Imaging Device".
Important:
You may be requested to restart your computer after unin-
stalling the software. Always save all files beforehand and
close all active programs before restarting your PC.
Camera maintenance
Please read the following maintenance information to en-
sure you are using your DD100 correctly.
Places to avoid
Do not store or use the camera in the following places:
- Very damp, dirty or dusty places
- Places in direct sunshine or extreme temperatures, such
as inside a locked car in summertime.
- Extremely cold places.
- Places exposed to severe vibrations.
- Places exposed to smoke or steam.
- Places exposed to strong magnetic fields (e.g. in close
vicinity of electrically operated motors, transformers or
magnets)
- Places in which aggressive chemicals such as pesticides,
rubber or vinyl products are stored on a long-term basis.
- in wet rooms such as bathrooms, swimming pools etc..