Manual Minox DCC Leica M 3 Plus (page 16 of 25) (English)

102732

Zoom out

Zoom in

1/25

6. If the current resolution mode is High, the display

indicates “Lr“; if it is in Low Resolution mode, the

display indicates “Hr“.

7. Press the shutter release to set the appropriate

resolution mode. (If you are currently in ‘Hr’ mode,

the LCD displays ‘Lr’ and if you press the Shutter

Release while the LCD is displaying ‘Lr’, you will

change the mode from ‘Hr’ to ‘Lr’). An acoustic

signal confirms the alteration. After changing the

Hr/Lr mode, the camera will automatically reset to

basic mode.

Video conference

Your DCC can be used as Web Cam for video conferences.

Please follow the instructions given below for this pur-

pose.

1. Switch on your DCC by pressing

the On/Mode button.

2. Press the On/Mode button until the mode

for video conferences “VC“ appears.

3. Press the shutter release to confirm and set this

mode. The flashing stops and “VC“ is displayed.

4. Connect the Camera to your PC via the provided

USB cable.

5. Start the ArcSoft PhotoImpression software as

follows: Start  Programme  ArcSoft PhotoImpres-

sion  PhotoImpression.

6. Click on “Get Photos“ and select “Camera/Scanner“

7. Click on “ “ icon.

8. Select “Live“ to show the video.

Note

Video Conference is available in PC only.

Web Cam Brightness Adjustment

The Camera is preset to auto –brightness mode during

web-cam operation. It means the web-cam will adjust the

brightness automatically according to the ambient light

intensity. But, you can follow the below instruction and

change the brightness to any fixed level you prefer.

1. Click on “ “ icon in the PhotoImpression

2. Click on “Source“

3. You will see the brightness level and “ “

4. Un-check the “ “ to make it empty “ “

(The web cam is now set to manual brightness mode)

5. You can change the brightness value according to your

preference. (for normal office enviroment, the value should be

~5000)

6. Click “yes“ to confirm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Minox DCC Leica M 3 Plus in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Minox DCC Leica M 3 Plus Manual

Product: