294686
60
Zoom out
Zoom in
Previous page
1/63
Next page
TECHNICAL DETAILS
Type: Electronically governed 35mm single-lens reflex
AE camera
Exposure-control modes: Fully programmed ("P"),
aperture-priority automatic ("A"), and metered
manual ("M")
Lens mount: Minolta SLR bayonet of integrally
lubricated stainless steel (54° rotating angle); coupling
for full-aperture metering, finder display input, and
automatic diaphragm control, providing programmed
or aperture-priority auto operation with Minolta MD
lenses, aperture-priority auto operation with MC and
other Minolta SLR interchangeable lenses/accessories;
spring-return button for depth-of-field preview or
stop-down meter readings with other than MD or MC
lenses (standard lenses: MD 50mm f/1.2, f/1.4, f/1.7)
Exposure control and functions: Low-voltage, low-
current computer circuit incorporating quartz crystal
for sequential control to 1/30,000-sec. accuracy,
large-scale ICs, samarium-cobalt impulse-release
magnets, and linear-resistance inputs) varies both
aperture and shutter speed steplessly according to
special "faster-speed" program (see p. 30) in P mode,
or varies shutter speed steplessly according to aperture
set in A mode, to yield proper exposure for the film
speed and exposure adjustment set; auto-exposure
range: EV 1 to EV 18 (e.g., 1 sec. at f/1.4 to 1/1000
at f/16) at ISO 100/21° with f/1.4 lens; AE-lock
device holds meter reading for exposure at that value
regardless of subject-brightness changes
Shutter: Horizontal-traverse focal-plane type; elec-
tronically controlled stepless speeds 1/1000 to 4 sec.
set automatically with endlessly rotatable selector dial
locked at "P" or "A" setting or fixed speeds 1 to
1/1000 sec. or "B" (bulb) set manually at detented
dial indications; electromagnetic shutter release locks
when voltage too low for proper operation
Metering: TTL center-weighted averaging type, by
silicon photocell mounted at rear of pentaprism for
available light, measured full aperture for normal
finder display, then at taking aperture for pro-
grammed/automatic-exposure setting/determination or
stop-down display; by another SPC mounted with
optic in side of mirror compartment for TTL off-film
Direct Autoflash Metering at taking aperture during
exposure to control burst duration of PX-series flash
units
Film-speed range: ISO 25/15° to 1600/33° set by
ASA dial that locks at 1/3-EV increments
58
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta x 700 mps at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta x 700 mps in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info