29
FULLY AUTOMATIC OPERATION
28
Full Auto is the camera’s standard operating mode and is
suited for use in almost any situation.
• Press the program-reset button to set the camera to fully
automatic operation (Full Auto) at any time. See page 71.
1. Press the main switch to
turn the camera on.
2. Press the program-reset
button to set the camera
to Full Auto.
3. Set the format-selector
switch to the desired print
format (C, H, or P).
4. Center your subject in the
focus frame and
press the shutter-release
button partway down to
activate autofocus. The
focus lamp will glow
when the subject is in
focus.
• The built-in flash will pop-up
and fire when necessary.
5. When using a zoom lens,
rotate the zooming ring
on the lens to frame the
subject as desired.
6. Press the shutter-release
button all the way down
to take the picture.
• In low-light conditions, the AF Illuminator (flash) will fire to
determine the focus distance.
• If your subject is outside the focus frame , use focus hold.
See page 31.
