8180
REMOTE CONTROL MODE
1.Place the camera on a tripod and press the self-
timer/remote-control button until appears in the
data panel.
(Continued on the following page)
The IR Remote Control RC-3 allows remote camera operation from up to 6m (19.7 ft.)
away.
• The remote control will not operate with backlit subjects or under fluorescent light.
• After taking the picture, the remote control is canceled for the next frame.
• To save power, the camera automatically shuts itself off if the remote control is not
operated for more than eight minutes.
CONTINUOUS DRIVE MODE
In this mode, the camera continuously takes pictures and advances the film as long as
the shutter-release button is held down.
2.When you’re ready to take pictures, press the
shutter-release button all-the-way down and hold.
• The shutter will continue to release and advance the film as long
as the shutter-release button is held down. When taking flash
pictures, the shutter will release after the flash has charged.
• To cancel the continuous drive mode, press the self-timer/drive-
mode button until the indicator disappears from the data panel, or
turn the camera off.
1.Press the self-timer/remote-control button until
appears in the data panel.
