REMOTE CONTROL MODE (OPTIONAL)
67
CONTINUOUS DRIVE MODE
66
1. Press the self-timer/remote-control button until
appears in the data panel.
2. Press the shutter-release button all-the-way down
and hold.
• The camera will release the shutter and advance the film
as long as the shutter-release button is held down.
• When taking flash pictures, the shutter will release after the
flash has charged.
• To cancel the continuous drive mode, press the self-
timer/remote-control button until disappears from the
data panel, or turn the camera off.
1. Place the camera on a tripod and press the self-
timer/remote-control button until appears in
the data panel.
The IR Remote Control RC-3 (not included) allows remote camera operation up to 6m
(19.7 ft.) away.
• The remote control may not operate with backlit subjects or under fluorescent light.
• To save power, the camera automatically shuts down if the remote control is not operated for
more than eight minutes.
In this mode, the camera will release the shutter and advance the film as long as the
shutter-release button is held down.
(Continued on the following page)