14 15
INSTALLING THE BATTERY CHECKING THE BATTERY POWER
Your camera uses one 3-volt CR-2 lithium
battery to supply power for all camera
operations.
1.Turn the camera upside down, then
open the battery chamber as shown,
using the bigger button key.
2.Insert the battery into the chamber as
indicated by the + and – marks.
3.Close the battery chamber, then turn
the lock until it stops at CLOSE.
• After installing a new battery, reset the date
and time (p. 46).
Each time the lens cover is opened, a symbol will appear in the data
panel to indicate the power status of the battery.
Briefly appears. Power is sufficient for all
camera operations.
Power is sufficient, but the battery must be
replaced soon.
Replace the battery. The shutter will lock
until the battery is replaced.
Continued on following page.