Manual Minolta SCAN_DUAL (page 8 of 68) (English)

31248

Zoom out

Zoom in

1/68

Turn off the PC and all the devices in the SCSI chain down

before changing SCSI IDs, connecting, or disconnecting SCSI

cables. Hardware damage may occur if this precaution is not

followed.

SETTING THE SCSI ID

A SCSI ID is a unique address you assign to each SCSI device connected to your PC. The

SCSI ID range of your PC is from 0 to 7. Do not use a SCSI ID for more than one SCSI

device.

1. Turn off the PC and all connected SCSI devices.

Setting the SCSI ID

SCSI ID Dip Switch Settings

3. Using a pointed object, set the switches to an

unused SCSI ID.

• The Dimâge Scan Dual’s SCSI ID is factory preset to 5. If 5 is not

occupied, there is no need to change the SCSI ID.

• Two operating SCSI devices in the same SCSI chain cannot share a

SCSI ID.

2. Determine which SCSI IDs are not being used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Minolta SCAN_DUAL in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Minolta SCAN_DUAL Manual

Product: