41
Program-shift function allows adjustment to the shutter-
speed/aperture combination determined by the camera in
both the program and full-auto program exposure modes. The
built-in flash cannot be used with program shift. If the flash is
raised, any changes made with program shift are canceled.
Press the shutter-release button partway down until the
shutter speed and aperture are displayed.
Turn either the front or rear control dial to shift the shutter
speed and aperture combination; each combination gives the
equivalent exposure. The values are shifted depending on the
position of the exposure-compensation dial, see camera
notes below. The front dial changes the shutter speed (P
S)
and the rear dial changes the aperture (P
A). If the lighting
changes, the shifted value remains fixed and the other
changes for the exposure.
PROGRAM SHIFT - PS/PA
When adjusting the exposure in any of the
exposure modes, the position of the exposure-
compensation dial specifies the increment
between 0.5Ev and 0.3Ev. For more on Ev see
page 81.
When changing the position of the exposure-
compensation dial, confirm it is set to the zero (0)
position or the it will affect the exposures. See
page 48 for more on the exposure-compensation
dial.
Camera Notes
0.5Ev
steps
0.3Ev
steps