24
G
ETTING UP AND RUNNING
INSERTING AND CHANGING A MEMORY CARD
A memory card must be inserted for the camera to operate. If a card has not been
inserted, “----” is displayed in the frame counter. Type I and II CompactFlash cards and
Microdrives are compatible with this camera. For memory card care and handling, see
page 142.
Always turn off the camera and confirm the access lamp is not lit before inserting
or removing a memory card, otherwise the card may be damaged, and data lost.
1. Open the card-slot door in the direction
indicated.
2. Insert a memory card all the way into the card
slot. Insert the card so the face is toward the
front of the camera. Always push the card in
straight. Never force the card. If the card does
not fit, check that it is oriented correctly.
3. Close the card-slot door.
4. To eject a card, open the card-slot door, and
press and release the card-eject lever to
extend it.
5. Press the card-eject lever to eject the card.
The card can now be pulled out. Take care
when removing the card as it becomes hot
with use. The card-eject lever should remain
inside the camera body. If it extends, push it
into the camera.
6. Insert a new memory card and close the card-
slot door.
123
456
