295785
40
Zoom out
Zoom in
Previous page
1/69
Next page
EXPOSURE BRACKETING
77
AE LOCK
76
Exposure bracketing lets you expose a series of frames with
exposures below and above the normal metered exposure. This
function is especially useful when shooting with reversal film,
because of the film's low tolerance for exposure error.
With the 800si, you can choose a series of 3, 5, or 7 frames. The
exposures can be made in 0.3, 0.5, or 1.0 EV increments.
Press the drive-mode button
in the control panel.
Turn either control dial until
the exposure-bracketing
indicator appears in the
data panel.
Press the adjust button in the
control panel.
• The exposure-bracketing indicator
will start blinking.
While holding the AE-lock
button, recompose the picture.
• A mark on the meter index will
indicate the difference between the
locked exposure (0) and the
exposure value of the area
currently being read.
• Do not release the AE lock button
until after the picture is taken.
Press the shutter-release button all the way down to take
the photograph.
• Exposure will remain locked as long as your finger depresses the
AE-lock button.
If the flash is up and appears in the viewfinder, Slow-shutter
Sync will be activated (p 88). The spot-metering frame and a
second mark on the index meter will not appear.
Customize Function #10 - AE Lock Button
Setting 1 - In default operation the AE lock button is only active
while it is being pressed.
Setting 2 - The operation of the AE-lock button can be changed
so AE lock is active after the button is pressed. AE lock remains
active until the AE-lock button is pressed a second time. In this
setting, AE lock is also cancelled by turning the camera off,
turning on the flash, or removing the lens.
Continued on next page.
2152EE 17/10/97 10:57 AM Page 76
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta dynax 800 si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta dynax 800 si in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info