295785
36
Zoom out
Zoom in
Previous page
1/69
Next page
RELEASE PRIORITY
69
FOCUS FRAME
68
The default setting of the 800si is autofocus-priority shutter release.
When the camera is in autofocus, the shutter will not release if the
subject is not in focus. You can set the camera to shutter-release
priority so the shutter will release even if the subject is not sharply
focused.
Press and hold the adjust
button and press the ISO
button.
• CUSt - 1 and a setting number of
1 will appear in the data panel.
Turn the rear control dial so the
setting number in the lower right
corner is changed to 2.
Press the shutter-release button
partway down to enter the
selection.
• RP will appear in the data panel.
• Pressing the program-reset button will return the camera to AF Priority.
MEMORY: The Release Priority setting can be stored in memory.
See page 99 for information.
Customized Function #1 - Release/AF Priority
This page describes the Release/AF Priority customize function.
For additional information, see page 99 and page 102.
LOCAL FOCUS AREA
While pressing the AF button,
turn the front control dial to
display each local focus area.
When the desired local focus
area appears in the
viewfinder, release the AF
button. The selected local
focus area indicator will
remain in the viewfinder.
• To return to wide focus area, press
and hold the AF button and turn
the front control dial one click.
When the RF 500mm lens or the AF Power Zoom 35-80mm lens is
attached, only the center local focus area can be selected.
• If Customized Function #6 is on setting 3 (Lens’ focus hold button
operates Continuous Autofocus), operation of continuous autofocus will
be suspended while the dial is turned to select a local focus area.
Select a specific local focus AF sensor for the camera to use.
2152EE 17/10/97 10:56 AM Page 68
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta dynax 800 si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta dynax 800 si in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info