295785
10
Zoom out
Zoom in
Previous page
1/69
Next page
LOADING FILM
16 17
Remove and discard the protective cover in the
film gate before loading film for the first time.
Check the film window before loading film. If a
film cartridge is loaded, do not open the back cover. See page 24
for instructions on rewinding a partially exposed roll of film.
Slide the back-cover release
down to pop open the back
cover.
Place the film cartridge in the
film chamber as shown.
Extend the leader between the
guide rails to the film-leader
index.
• If the film tip extends beyond the
red mark, gently push the excess
film back in the cartridge.
Close the back cover and
slide the main switch to ON.
• The camera will automatically
advance the film to the first frame
and 1 will appear in the frame
counter in the data panel.
• If DX-coded film is used, the
camera will automatically set the
correct film speed and display it in
the data panel for 5 seconds after
loading.
will blink in the frame counter and the shutter will
remain locked if the film is loaded incorrectly. Open
the back cover and repeat steps 2 through 4.
Never touch the shutter curtain with your fingers or
with the film tip. Its precision design makes it
extremely sensitive to pressure.
Always load film in subdued or shaded light to reduce the chances of
fogging the film.
• Do not use Polaroid instant 35mm film. Winding problems may occur.
• Non DX-coded film:
If non-DX-coded film is used, the ISO setting of the previous roll of film
will be used.
The camera assumes the number of frames is no more than 36. If a
roll of non-DX-coded film with more than 36 exposures is loaded,
please change the Film Rewind Start customized setting to manual
start (p 102).
Protective Cover
Right Wrong
2152EE 17/10/97 10:52 AM Page 16
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta dynax 800 si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta dynax 800 si in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info