64
A
DVANCED RECORDING
Continuous-advance mode allows a series of images to be captured while holding down
the shutter-release button. Continuous advance acts like a motor drive on a film camera.
The number of images that can be captured at one time depends on the image-quality
setting; five with RAW images, and three with the other options. When the shutter-release
button is pressed and held, the camera will begin recording images until the maximum
number has been taken or the shutter button is released. The built-in flash can be used,
but the rate of capture is reduced because the flash must recharge between frames.
STANDARD AND HIGH SPEED CONTINUOUS ADVANCE
3
4
2
1
Turn the function dial to the drive mode position
(1). Press the function button in the center of the
dial (2). Turn the front control dial to select the
continuous-advance drive mode (3). Use the rear
control dial (4) to switch between standard and
high-speed continuous advance. Press the
shutter-release button partway down or press the
function button to set the mode.
Standard continuous advance
High-speed continuous advance
Continuous advance - captures a series of images at 2.0fps. When used with
continuous autofocus, the camera will adjust the focus during the series. The live image
will be briefly displayed between frames.
High-speed continuous advance - captures a series of full-size images at 2.8fps. The
rate of capture decreases with images smaller than 2560 X 1920. Focus is locked with
the first frame regardless of the focusing mode. The live image will freeze during the
series.
