92
OPNAMESTAND
FLITSREGELING
AD, pre-flash DDL en handmatige flitsregeling zijn beschikbaar. De flitsmethode kan worden gekozen
in de basis-sectie van het opnamemenu (blz. 78).
ADI flitsmeting - Advanced Distance Integration. Deze stand combineert de afstandsinformatie uit
het AF-systeem met de informatie van een voorflits. ADI laat zich niet misleiden door de helderheid
van het onderwerp of de achtergrond, iets wat bij meer conventionele DDL-flitssystemen wel
voorkomt. Daardoor wordt bij uiteenlopende onderwerpen een optimale flitsbelichting bereikt.
Pre-flash DDL - Hier wordt alleen de voorflits gebruikt, niet de afstandsinformatie. Gebruik deze
methode bij het gebruik van voorzetlenzen en filters die de hoeveelheid licht die de camera
binnenkomt verminderen, denk aan grijsfilters. Pre-flash DDL moet ook worden gebruikt wanneer de
ingebouwde of een externe flitser voorzien is van een diffusor.
De camera schakelt automatisch over van ADI naar Pre-flash DDL wanneer het contrast in het
onderwerp zo laag is dat het autofocus systeem niet goed werkt. Kan het AF-systeem niet goed
scherpstellen, druk dan op de scherpsteltoets (AF/MF) en stel met de hand scherp. Dan blijft ADI in
werking.
Handmatige flitsregeling - flitser flitst op vol vermogen, op 1/4 of op 1/16. Het vermogen wordt
gekozen in de basic-sectie van het opnamemenu (blz. 78). Omdat er geen voorflits wordt gebruikt
kan deze instelling ook worden gebruikt om flitsers of flitsinstallaties te ontsteken die met een slave-
unit (draadloze ontsteker) werken.
Onderstaande tabel geeft bij benadering de richtgetallen, voor de berekeningen die nodig zijn voor
handmatige flitsregeling. De bijvermelde berekeningen zijn nuttig voor het bepalen van richtgetal,
diafragma (fn) en de benodigde afstand tussen flitser en onderwerp.
Richtgetal (voor afstanden in meters)
Handm.
flitsreg.
Full
1/4
1/16
100
200 400 800
Cameragevoeligheid (ISO)
8
4
2
11
5,6 8
5,64
16
11
22
Richtgetal = ƒn. X afstand
Richtgetal
ƒn.
= afstand
Richtgetal
afstand
= ƒn.
2.8