472291
61
Zoom out
Zoom in
Previous page
1/194
Next page
Adjustment Procedures MINOLTAFAX 5600
3-18
Memory Switch B:5 - Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Program individual autodialer
attributes
0: No
1: Yes
Allows individual setting of memory switches B:0
as attribute 1, B:1 as attribute 2, B:2 as attribute 3
and B:3 as attribute 4 when one-touch and speed
dial locations are programmed. (Refer to page 3-37
for settings.)
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Sending RTC signal when
transmission is canceled
0: Yes
1: No
RTC signal is sent at the end of the transmission.
When set at “0”, the unit will send the RTC if the
transmission is canceled. No error will occur. When
set at “1”, an error will occur because RTC will not
be sent at the end of a canceled transmission.
1 1 Redial if T.4.1 or T.4.4 error
occurs
0: No
1: Yes
When set at “0”, if a T.4.1 or T.4.4 error occurs,
the unit will not retry the transmission.
0 0 Action after EOR signal
0: Continue
1: Discontinue
Sets action after receiving PPR four times at 2400
bps.
Memory Switch B:6 - Transmission
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 1 Factory use only
3 1 Additional data on TTI
transmit
0: No
1: Yes
When set at “0”, the transmission of the additional
data (time, the number of pages, file number, etc)
is disabled.
Note:
This switch is available only when Memory
switch B:2, bit 4 and/or Memory switch B:3, bit 5 is
available.
2 1 Subscriber ID transmit
0: No
1: Yes
When set at “0”, the transmission of the subscriber
ID is disabled.
Note:
This switch is available only when Memory
switch B:2, bit 4 and/or Memory switch B:3, bit 5 is
available.
1 1 TTI (name) transmit
0: No
1: Yes
When set at “0”, the transmission of the name
which was stored in the unit is disabled.
Note:
This switch is available only when Memory
switch B:2, bit 4 and/or Memory switch B:3, bit 5 is
available.
0 0 Factory use only
Memory Switch B:7 to B:9 --- Factory use only
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta 5600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta 5600 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info