727618
27
Zoom out
Zoom in
Previous page
1/32
Next page
least 3 times.
-Clean the opened brewing unit under warm running
water. In particular, the stainless steel screen must be
rinsed out well to remove any coffee residue.
- Shake the brewing unit lightly under water
- Dry the brewing unit.
- Replace the brewing unit by turning it into the right po-
sition (the outlet tube facing downwards and to the front),
insert the brewing unit into the guide grooves and push it
completely into the coffee machine.
Push the coffee grounds container back into the appliance and
push the outlet unit into the upper position. Close the door.
Cleaning the brewing unit:
-It enables intensive cleaning of otherwise inaccessible
areas. The cleaning programme must be started when
the following symbol appears on the display:
-The cleaning process takes approx. 8 minutes and
should not be interrupted.
-In case of power failure during the cleaning programme,
it has to be restarted.
-Before running the cleaning programme, the metal sie-
ves in the brewing unit must be clean and wiped dry.
-The cleaning water is collected in the drip tray.
To run the cleaning programme proceed as follow:
-Press button 2 until the function display “ cleaning
programme” is selected.
-The press OK (button 6).
-Thedisplay“cleaningprogramme”ashesinthedisplay,
whilethe“llwatertank”displayispermanentlylit.
-Removethewatertank(7)andllwithmin1Lfresh
water. Insert the water tank again.
-Open the lid of the coffee bean container (N) and the
coffee power shaft (J).
-Put a cleaning tablet into the coffee powder shaft.
-The press OK (button 6).
The appliance will implement several cleaning cycles.
After the cleaning phase is completed, the OK display
will light up permanently.
- Remove and empty the drip tray.
- Press the drip tray back onto the appliance until it
audibly engages.
-Then push OK (button 6).
-The appliance then initiates the rinsing phase and then
the brewing unit is positioned.
-The cleaning program is complete when the “Cleaning
program” function display goes out.
- Remove the drip tray and empty it.
- Press the drip tray back onto the appliance until it
audibly engages.
-Removethewatertank,llitwithcleanwaterandpush
it back in.
The appliance is now ready for operation again in the
last selected coffee mode status.
Running the descaling programme:
-The descaling program enables simple and effective
descaling of your coffee machine. You should descale
the coffee machine at regular intervals, but at least when
the following symbol appears on the display:
Note:
The descaling process runs in 2 phases, takes approx.
10 minutes and should not be interrupted.
In case of power failure during the descalling program-
me, it has to be restarted.
The frequency of descaling depends on the hardness of
the water in your region. Therefore, please do not forget
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minimoka CM-4758 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minimoka CM-4758 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info