727617
14
Zoom out
Zoom in
Previous page
1/24
Next page
coffee cups can be warmed by placing them upside
down on the cup warming plate.
Preparing an Espresso:
-Place one or two pre-heated cups below the pouring
spouts.
-Turn the operating dial to the espresso setting. You
will hear the machine making a pumping noise, this is
normal.
Oncethecup/sarelledtothedesiredlevel,turnthe
operating dial to the off (O) position
Removethelterholderandthelterbyturningthelter
holder handle to the left.
Toremovetheusedcoffeegrindsfromthelter,simply
turn the group handle upside down in a bin and gently
tap out the coffee.
-After each use of the espresso machine for best result
when making consecutive cups of espresso, we recom-
mendthatyouushasmallamountofwaterthrough
themachinewiththelterholderalreadyremovedfrom
the brewing head. Simply turn the operating dial to the
espresso setting and allow the water to run through until
youhaveaconsistentowofwater.Thiswillwashout
any old or used coffee grinds stuck to underside of the
brewing head and also help ensure the correct water
temperature for your next shot of espresso.
Note:Donotleavethelterholderlockedinpositionfor
extended periods, or when machine is not in use. This
shorten the life of brew head rubber seal.
Obtaining steam
The steam function can be used for frothing milk.
Important: There is risk of scalding when the steam
nozzle is in use. Hot water or hot steam can cause
scalding. Only use the steam wand when it is immersed
in the milk.
-Fill the water reservoir with cold water and start the unit.
-Position the steam wand so that the tip is over the drip
tray.
-Turn the dial to the steam position. Some water will
come out to the steam wand. Once steam start to come
out turn the dial to the off (O) position.
-Swing the steam nozzle to the side of the machine.
Pour cold milk into a stainless steel jug no more than
1/3 full.
Tips: For best results, we recommend using refrigerated
milk and a stainless steel jug that is well chilled. Be sure
not to rinse the jug with warm water before use.
-Hold the jug under the steam wand so that the nozzle
opening is completely immersed in the milk. Turn the
operating dial to the steam setting to activate the steam
and commence texturing milk.
-Angle jug so the steam wand is resting on the spout of
the jug and position the tip of the steam wand just below
the surface of the milk.
Note: The nozzle must not touch the bottom of the jug to
ensure that the steam release is not obstructed.
-Move the jug so that the steam wand is in the centre,
this is will create a whirlpool motion to the milk. As the
steam heats the milk, the milk will begins to rise. Follow
the level of the milk by lowering the jug, always keeping
the tip of the steam nozzle just below the surface.
When the milk is ate temperature close the steam by
turning the dial to the off (O) position.
Note: Do not boil the milk.
Once you have nished using the appliance:
- Stop the appliance by pressing the on/off button
- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- It is advisable to clean the appliance regularly and
remove any food remains.
- If the appliance is not in good condition of cleanliness,
its surface may degrade and inexorably affect the
duration of the appliance’s useful life and could become
unsafe to use.
- Neither parts of this appliance are suitable for cleaning
in the dishwasher.
- Then dry all parts before its assembly and storage.
How to deal with lime scale incrustations:
-We recommend that you descale your machine every
2-3 months, although this period will depend on the hard-
ness of water and frequency of use of the machine.
- For the appliance to work correctly it should be kept
free of limescale or magnesium incrustations caused by
the use of hard water.
- To prevent this kind of problem, we recommend the use
of water with low lime or magnesium mineralisation.
Anomalies and repair
- Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
For EU product versions and/or in case that it is reques-
ted in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance
consistsareincludedinacollection,classicationand
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
of material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
Manual CM1866.indb 14 10/02/14 15:23
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minimoka CM-1866 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minimoka CM-1866 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info