- Never leave the appliance unattended while in use.
- Never leave the appliance connected and unattended if is not in use. This
saves energy and prolongs the life of the appliance.
-Donotremovethelterholderwhencoffeeisbeingmade,asatthattimeit
is under pressure.
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer’s liability null and void.
Instructions for use
Before use:
- Make sure that all the product’s packaging has been removed.
-Beforeconnectingthemachine,checkthatthebuttons(F ,G)arenotpressed,
andthecoffee/steamselector(H)isincentralposition
-Beforeusingthisproductforthersttime,itisadvisabletotestitonlywith
water .
-Beforeusingtheproductforthersttime,cleanthepartsthatwillcomeinto
contact with food in the manner described in the cleaning section.
Priming the circuit:
Thissimpleoperationensuresoptimumdispensingandmustbecarriedout:
-Whenrststarting:
-Whenthemachinehasbeenoutofuseforalongtime(1or2weeks)
-After making steam
-When the tank has run out of water .
- Fill the receptacle taking care to observe the MAX level
- Connect the appliance to the mains.
-Settheon/offswitch(F)attheonposition.Thepilotlightwillcomeon
- Y ou do not have to wait for the machine to heat up for this operation
-Withoutttingthelterholder(orwiththelterholdertted,butwithoutcoffee),
place a recipient in the position of the coffee cup.
- Select the coffee position by rotating the control to this position.
-Waterwillexitthroughthelterholderposition.W aituntilapproximatelyone
cupful has exited
-T onishserving,rotatetheselectioncontroltothecentralposition..
This will complete the priming operation.
Filling with water:
-Thedepositmustbelledwithwaterbeforeturningtheapplianceon.
- Remove the water tank.
- Open the cover .
-FillthedeposittakingcaretoobservetheMAXlevel(Fig.1)
- Close the lid.
-Replacethetankinitshousing,ensuringthatitiswelltted.
Preparing coffee:
-Removethelterholder .
-Positionthegroundcoffeelter(M)lterholder
- We recommend using natural toast coffee, as using roasted cof fee may affect
the operation of the machine.
-Filltheremovablelterwithgroundcoffee(6-7gpercuptobeprepared).
-Ifyouwishtomake1coffee,lltheladle(1spoonful)andtakethecapacityof
the measuring spoon as the measure for one coffee until half its capacity .
- For 2 coffees, put in 2 spoonfuls.
- Next lightly press down the ground coffee with the back of the spoon.
-Beforettingthelterholderinthecoffee-makerassembly ,turntheladle-
holder backwards.
-Fitthelterholderintheapplianceoncemore.
-Positionthelterholderinthecoffeeassemblybyinsertingtheassembly
downwards and turning it from left to right until it locks.
-Beforeconnectingthemachine,checkthatthebuttons(F ,G)havenotbeen
pressed and that the steam coffee selector in the central position
-Insertthelterholderwithcoffeeintotheappliance
-Turn it anticlockwise until it is in the locked position.
- Connect the appliance to the mains.
- T urn the appliance on using the on/off switch.
- The pilot light comes on.
-Waituntilthepilotlight(E)islighting
-Placeoneortwopre-heatedcupsatthelterholderoutlet.
- T urn the coffee/steam selector to the coffee position. The cof fee infusion will
begin to exit. When you have obtained the desired quantity of espresso coffee
(shortorlong),turnthecontroltothecentralposition.
-Onceservinghasnished,waitafewsecondsandremovethecupswiththe
coffee.
-Removethelterholderandemptythegroundsfromit.
-Washthelterholderwithrunningwateranddryitwell.
-Checkthattheremovablelterisperfectlyttedintothelterholder .
-Fitthelterholderintheapplianceoncemore.
Making coffee with single serving bags:
-Removethegroundcoffeelterfromthelterholder .
-Insertthelterforsingleservingbagsintothelterholder .
-Nextputthesingleservingbagintothelterholder;ensurethatthepaperof
thebagdoesnotprotrudefromthelterholder .
-Fixthelterholderintothecoffeeassemblybyinsertingitbelowtheassembly .
-T urnthelterholderfromlefttorightuntilitlocks.
- Place a cup or recipient under the coffee release
-Turn the control to the cof fee outlet.
-Follow the “coffee preparation” process
-Removethesingleservinglterandthrowawaytheusedbag.
-Washthelterholderandthesingleservinglter(dryingthemwell)
Obtaining steam:
- The steam is used to foam milk for cappuccino, and also to heat other liquids.
- T urn the appliance on using the on/off switch.
- Wait until the pilot light has gone out which will indicate that the appliance has
reached an adequate temperature.
-Press the heating button and continue heating until the steam temperature
has been reached.
- The heating pilot light will come on indicating that the water is heating to
produce steam.
-Place a recipient under the steam tube.
-Select steam outlet
- Steam only will begin to exit.
- When you have enough, close the control and remove the recipient.
Auto-disconnection function
Minimoka machines are designed to save energy .
-Forthispurpose,ifafter30minutestheuserhasnotperformedanyactionon
it, the appliance will switch off automatically .
- T o return to normal operation, simply press the on/off switch.
Once you have nished using the appliance:
- T urn the appliance off by pressing the on/off switch for a few seconds.
- Unplug the appliance to the mains.
- Remove the water from the water tank.
- Clean the appliance
Cleaning
- Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry .
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- It is advisable to clean the appliance regularly and remove any food remains.
- If the appliance is not in good condition of cleanliness, its surface may
degrade and inexorably affect the duration of the appliance’s useful life and
could become unsafe to use.
- Afterwashing,dryallthepartsbeforettingthemtogetherandstoring.
How to deal with lime scale incrustations:
- For the appliance to work correctly it should be kept free of lime scale or
magnesium incrustations caused by the use of hard water .
- T o prevent this kind of problem, we recommend the use of water with low lime
or magnesium mineralisation.
- However , if it is not possible to use the kind of water recommended above,
youshouldperiodicallyremovethelimescalefromtheappliance:
-Every6weeksifthewateris“veryhard”.
- Every 12 weeks if the water is “hard”.
-T odoso,werecommendtheuseofthespecicproductT aurusDecal,which
can be found in specialised shops and authorised technical services.
- Homemade solutions are not recommended in the de-scaling of this applian-
ce, such as the use of vinegar .
Anomalies and repair
- T ake the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
- If the connection to the mains has been damaged, it must be replaced and
you should proceed as you would in the case of damage.
ForEUproductversionsand/orinthecasethatitisrequestedinyourcountry:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included
inacollection,classicationandrecyclingsystem.Shouldyouwishtodispose
of them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be
considered harmful to the environment
This symbol means that in case you wish to dispose of the
product once its working life has ended, take it to an authorised
waste agent for the selective collection of waste electrical and
electronicequipment(WEEE)
ThisappliancecomplieswithDirective2006/95/EConLowV oltage,withDi-
rective2004/108/EConElectromagneticCompatibility ,withDirective201 1/65/
EU on restrictions on the use of certain dangerous substances in electrical and
electronicappliancesandwithDirective2009/125/EContheecologicaldesign
requirements applicable to products related to energy .
Manual CM 1675.indb 14 19/12/14 17:40