Manual Mini COOPER 2007 hardtop (page 104 of 148) (English)

577522

104

Zoom out

Zoom in

1/148

Replacing components

102

Replacing components

Onboard tool kit

The onboard tool kit is stored in a compartment

underneath the cargo area floor panel.

Wiper blades

Changing the front wiper blades

1. Fold up the wiper arm.

2. Position the wiper blade horizontally.

3. Press the securing spring, arrow.

4. Unhook the wiper blade toward the wind-

shield.

5. Pull the wiper blade past the wiper arm

toward the top.

6. Insert the new wiper blade.

7. Press into position until you hear it engage.

To avoid damage, make sure that the

wiper arms are against the windshield

before you open the bonnet.<

Changing rear wiper blade

1. Fold up the wiper arm.

2. Rotate the wiper blade toward the back as

far as it will go, arrow.

3. Press the wiper blade against the limit and

thus out of the mounting.

4. Press the new wiper blade into the fixture

until it engages audibly.

Lamps and bulbs

Lamps and bulbs make an essential contribution

to vehicle safety. They should, therefore, be

handled carefully. The manufacturer of your

MINI recommends having your MINI Dealer per-

form any work that you do not feel competent to

perform yourself or that is not described here.

Never touch the glass of new bulbs with

your bare fingers, as even minute

amounts of contamination will burn into the

bulb's surface and reduce its service life. Use a

clean tissue, cloth or something similar, or hold

the bulb by its base.<

You can obtain a selection of replacement bulbs

at your MINI Dealer.

When working on electrical systems,

always begin by switching off the con-

sumer in question, otherwise short circuits could

result. To avoid possible injury or equipment

damage when replacing bulbs, observe any

instructions provided by the bulb manufac-

turer.<

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mini COOPER 2007 hardtop in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mini COOPER 2007 hardtop Manual

Product: