641668
20
Zoom out
Zoom in
Previous page
1/105
Next page
17
GB
English
TECHNICAL DATA
Magnetic core drilling machine
MDE 41 MDP 41
Production code 4523 56 02...
4523 50 02...
... 000001-999999
4523 43 02...
... 000001-999999
Rated input 1200 W 1200 W
No-load speed 1st gear
No-load speed 2nd gear
475 min
-1
730 min
-1
475 min
-1
730 min
-1
Lengths of stroke 146 mm 146 mm
Max. magnetic power 9,93 kN 8,89 kN
Drill diameter max. with core hole drill bit 41 mm 41 mm
Drill diameter max. with solid drill bit 13 mm 13 mm
Spindle receiver 19 mm Weldon 19 mm Weldon
Weight according EPTA-Procedure 01/2003 13,5 kg 14 kg
Noise information
Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
95,0 dB(A)
106,0 dB(A)
95,0 dB(A)
106,0 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 61029
Vibration emission value a
h
Uncertainty K=
2,17 m/s
2
1,5 m/s
2
2,17 m/s
2
1,5 m/s
2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications,
with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signicantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY WARNINGS MAGNETIC CORE DRILLING
MACHINE
Always use the protective shields on the machine. Use protective
equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as
dust mask, protective gloves, sturdy non-slip footwear, helmet and
ear defenders.
Never reach into the danger area of the machine when it is running.
Chips and splinters must not be removed while the machine is
running.
Do not use a damaged accessory.
Clamp or otherwise secure the workpiece. To reduce the risk of
injury, do not hold workpiece by hand.
WARNING! Wet connections are shock hazards.
Do not use cutting uid in an overhead or any other position that
allows cutting uid to enter motor or switch enclosure.
Do not let any metal parts enter the airing slots - danger of short
circuit!
SPECIFIED CONDITIONS OF USE
The drill stand is suited for drilling large holes in steel and other
ferroginous metals.
WORKING INSTRUCTIONS
MDP 41: The electromagnetic drill press attaches magnetically to
6,35 mm or thicker ferrous stock. Do not use on stock less than 6,35
mm. The magnetic base WILL NOT hold on nonmagnetic grades of
stainless steel.
MDE 41: The electromagnetic drill press attaches magnetically to
9,5 mm or thicker ferrous stock. Do not use on stock less than 9,5
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Milwaukee MDP 41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Milwaukee MDP 41 in the language / languages: All languages as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info