641637

Milwaukee 9081-20 Manual

4
Zoom out
Zoom in
Previous page
1/15
Next page
6 7
Fig. 2
Removing Battery Pack from Tool
Push in the release buttons and remove the
battery pack.
Inserting Battery Pack into Tool
Battery pack can be inserted into the tool
in two ways.
1. For working in restricted spaces.
Insert the battery pack from the front
by pressing in the release buttons and
sliding battery pack into the body of the
tool (Fig. 1). Insert the battery pack until
clamp engages.
2. For optimum weight distribution and
balance.
Insert the battery pack from the back
by pressing in the release buttons and
sliding the battery pack into the body of
the tool (Fig. 2). Insert the battery pack
until clamp engages.
Fig. 1
ASSEMBLY
WARNING
Always lock trigger or remove
battery pack before changing or
removing accessories. Only use
accessories specifically recom-
mended for this tool. Others may
be hazardous.
Cat. No. 9081-20
This impact driver is intended for use with
drill and driver bits.
1. To attach an accessory, pull the ring out
and insert the accessory shank (Fig. 3 &
4). Release the ring (Fig. 5). It may be
necessary to pull the bit out slightly to
engage the holding mechanism.
2. To remove the accessory, pull out the
ring and remove the accessory. Release
the ring.
Fig. 3
Fig. 4
Fig. 5
Attaching and Removing Accessories
Cat. No. 9082-20 & 9083-20
These impact wrenchs are intended only
for use with sockets designed for im-
pact wrenches that have a 3/8" (Cat. No.
9082-20) or 1/2" (Cat. No. 9083-20) square
drive. Other sockets could shatter or break,
causing injury.
1. To attach a socket or other accessory,
align the accessory with the drive shank
and push it fi rmly over the retaining
ring.
2. To remove the accessory, pull the ac-
cessory off the drive shank.
WARNING
Use only sockets and other
accessories specifi cally designed for
use on impact wrenches and drivers.
Other sockets and accessories might
shatter or break causing injury.
WARNING
Recharge only with the charger
specifi ed for the battery pack. For
specifi c charging instructions, read
the operator's manual supplied with
your charger and battery pack.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Milwaukee 9081-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Milwaukee 9081-20 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info