770579
11
Zoom out
Zoom in
Previous page
1/68
Next page
How to activate nighttime setback
1.Tuesday 10.00 pm you go to the heater and press on the heater’s control panel.
2. "d" will be visible in the display. Use the + and - buttons to set what day it is today when
you are programming the heater (1=Monday), 2 = Tuesday etc.). You are not program-
ming the heater for various days. This is simply to tell the heater what day it is when you
are programming the heater. Select 2 for Tuesday. Confirm by pressing .
Advanced mode
If you want to have different temperature settings each day, you may use advanced mode. To
activate advanced mode you need to activate day and night setback first.
See figure 18 on seperate illustration sheet.
How to activate advanced mode for daytime setback:
1. Press and hold , then press + one time.
2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for
Monday. Confirm by pressing .
3. “°C” will flash in the display. Use the + and - buttons to set the temperature for daytime setback.
Confirm by pressing .
4. “H” will flash in the display. Use the + and - buttons to set the number of hours as desired setback
period. Confirm by pressing .
5. “SR” will be visible in the display. Now you have the option to set the time of day that you want
the setback time to start. You may choose from -4 hours to +4 from the time your daytime setback
normally starts. Meaning, if your daytime setback normally starts at 10:30, but you want the setback
time to be activated 08:30 every Monday, you may use the - button to set “-2” (hours). Confirm by
pressing
6. “d2” (day 2) which is Tuesday, will now be visible in the display and you may do the same
procedure to set the desired temperature for Tuesday. Keep repeating the same procedure for all 7
days.
How to activate advanced mode for nighttime setback:
1. Press and hold , then press + one time.
2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for
Monday night. Confirm by pressing .
3. “°C” will flash in the display. Use the + and - buttons to set the temperature for nighttime setback.
Confirm by pressing
5.The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
* Control light is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and
you will have to do this over again.
3. “C” will flash in the display. Use the + and - buttons to set 18 as the desired temperature for
nighttime setback. Confirm by pressing .
4. “H” will flash in the display. Use the + and - buttons to set 8 hours as desired setback period
(meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing .
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill MB600DN Glass panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill MB600DN Glass panel in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 11.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mill MB600DN Glass panel

Mill MB600DN Glass panel User Manual - German - 17 pages

Mill MB600DN Glass panel User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info