Manual Mill JA1500 - 2020 (page 33 of 36) (English, Danish, Swedish, Norwegian, Finnish)

789540

Zoom out

Zoom in

1/36

Assembly and instruction manual

Series:

Oil

Please read the instructions carefully before use.

Take good care of this manual for later use.

This product is only suitable for well insulated spaces or occasional

use.

Dette produktet er kun egnet til godt isolerte rom eller ved

sporadisk bruk.

Dette produkt er kun egnet til godt isolerede rum eller leijlighedsvis

brug.

Denna produkt är endast lämplig för välisolerade utrymmen eller

sporadisk användning.

Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin tai

satunnaiseen käyttöön.

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution

sell to many of the largest retailers in the Nordic countries.

In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry

with fresh new eyes and wondered why there had been so little change with the

appearance of portable heaters in the last 20 years, especially since interior design in

general had changed dramatically over the years. Philip thought consumers should

have more styles to choose from other than the typical old-fashioned, traditional

heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their

extensive knowledge to re-invent the design of heaters. They wanted to create

beautiful, modern and minimalistic heaters, using the most advanced technology, that

would complement people’s homes. They launched the brand “Mill” in 2012.

to complement our line of products to meet consumers’ demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the

world’s largest electronic fairs and home shows in 2015 and 2016 - the feedback from

retailers and distributors all over the world were amazing. We are proud to say that

consumers in over 25 countries can now keep warm with style!

@millheat

millheat.com

post@millheat.com

millheat.com

Content

P. 2-3

P. 4

P. 5

P. 6

Important safety information

First use

Description of heater

Parts

Assembly

Instructions

Usage

Maintenance

Warranty

Waste disposal

Please read the instructions carefully before use.

Take good care of this manual for later use.

IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

STORE THIS INSTRUCTION

MANUAL FOR FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS

CASING WITH WET HANDS!

You must obey common safety guidelines when using electrical

products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to the

heat, always make sure the plug is pulled out before the

heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.

• Make sure the heater is connected to the house's regular mains

as indicated on the heater.

•

• Check for any pieces of packing foam or cardboard that may

have fallen into the heating elements of the heater. These pieces

must be removed to avoid unpleasant odors.

• Prevent the heater from overheating – do not cover.

• long period of time.

• Pay special attention if the heater is used in rooms where

children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an electrical

socket outlet.

• The cord must not be laid under any kind of carpet. Make sure the

cord is laid in such a way that nobody can trip on it.

• The heater must not be used if either the cord or plug is

damaged. The heater must not be used if it has been dropped

malfunction.

• The cord must be repaired by the manufacturer or by an expert if it

has been damaged, to avoid dangerous situations.

• Avoid using extension cords, which may overheat and could

• hazards by making sure the air intakes are not blocked or

Important safety information

millheat.com

• The heater should not be installed in close proximity to

• The heater must never be used in rooms where gasoline, paint or

• Never touch an electric heater with wet hands. The heater

should be installed so a person showering or taking a bath

cannot come into direct contact with it.

• Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and

vulnerable people are present.

• heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heater is

connected. The heater may overload the electrical circuit if

other electrical devices are plugged into the same socket outlet.

• Do not use this heater in small rooms when they are occupied

by persons not capable to leaving the room on their own, unless

constant supervision is provided.

• The product cannot be used by children under 8 years of age

and persons with reduced physical or mental abilities or lack

of experience and knowledge unless they have been given

supervision or instruction in the safe use of the product and

understand the hazards involved.

• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised children.

• Children under the age of 3 should be kept away from the

product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn the

product ON/OFF, assuming the heater is mounted according

to the assembly instructions and the children have received

instruction or supervision in the safe use of the product and

understand the hazards involved.

• Do not use this heater in the immediate surroundings of a bath,

a shower or a swimming pool.

First use

Description of heater

transport. Contact the retailer or importer if you discover any visible damages to the

product.

Keep the outer packaging to transport the heater in the future. If you want to dispose

the packaging, make sure it is done properly. Keep plastic bags away from children.

d period without use,

the heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for

future use.

It is also normal for the heater to make “sounds” when it warms up or cools down.

Model Thermostat Color Amperage Power (W)

JA1000 Mechanical White 220-240V~, 50-60Hz 1000

JA1500 Mechanical White 220-240V~, 50-60Hz 1500

JA2000 Mechanical White 220-240V~, 50-60Hz 2000

1. Handle

2. Indicator

3. Thermostat

4. Output selector

5. Legs (aluminum)

Parts

• 8 screws (pre-mounted)

• 2 foot brackets

• 2 rails for the feet

First use

Description of heater

Parts

millheat.com

Instructions

1. Indicator light

2. Thermostat

3. Output selector

WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

JA1000 JA1500 JA2000

0: AV

I: 400W

II: 600W

III: 1000W

0: AV

I: 600W

II: 900W

III: 1500W

0: AV

I: 800W

II: 1200W

III: 2000W

1. Set the heater to OFF. Plug the heater into a grounded outlet.

2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum

position. When the desired room temperature has been reached, turn the

thermostat slowly down until you hear a click. The thermostat can now remain in

s soon as the room

temperature falls below this level, the heater will automatically switch on again.

When the room has again reached the desired temperature, the heater will switch

3. If you wish to change the room temperature, repeat the instructions in step 2.

become extremely hot.

Usage

Assembly

1. Remove the pre-mounted screws on both legs before you insert them into the

brackets, so that you get a stable foot.

2. Attach the legs to the brackets by tightening 2 screws into each bracket.

3. Remove the pre-mounted screws from the bottom of the heater and place the

heater gently on its head to mount the feet.

4. Two screws must be fastened on each foot bracket.

5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Control panel

Mill International AS

Grini Næringspark 10

1361 Østerås

Norway

Tel: +47 22 13 32 00

www.millheat.com

post@millheat.com

Maintenance

Warranty

Waste disposal

1. For cleaning, always unplug the heater and leave it to cool.

2. Wipe the heater regularly with a damp cloth and dry the surface before turning on

the heater again.

3. The heater must be cleaned at least once a month during the heating season.

CAUTION! The heater should never be immersed in water.

Avoid using detergents to clean the heater.

Never let any water get inside the heater; this can be hazardous.

5. The heater can be stored in a dry and clean place.

6. If the heater stops working, do not attempt to repair it yourself because it can

The warranty is valid for 2 years. The heater will be repaired or replaced during

this time should any malfunction occur. The warranty applies if the heater is used

according to these instructions and the customer can present a purchase receipt. If

the heater malfunctions in any way, please contact the store where it was purchased

or the importer.

The symbol indicates that this product is not to be disposed of together with

household waste. This product must be delivered to a recycling service or container

for electrical appliances and electronic equipment. This is done to avoid health risks

and prevent harm to the environment. Local businesses (or the environmental station

in your neighborhood) are required by law to accept and recycle such products, as a

means of environmentally sound disposal.

millheat.com

Innholdsfortegnelse

S. 2-3

S. 4

S. 5

S. 6

Viktig sikkerhetsinformasjon

Før førstegangsbruk

Førstegangsbruk

Beskrivelse av ovnen

Deler

Montering

Bruksanvisning

Bruk

Vedlikehold

Garanti

Avfallshåndtering

Vennligst les bruksanvisningen nøye før bruk.

Ta godt vare på denne bruksanvisningen for

senere bruk.

FOR Å UNNGÅ OVEROPPHETING,

IKKE DEKK TIL OVNEN.

TA VARE PÅ DENNE

BRUKSANVISNINGEN!

HA ALDRI VÅTE HENDER PÅ- ELLER

DEKK TIL OVNEN!

Vanlige sikkerhetsregler må alltid følges ved bruk av elektriske

artikler, spesielt når barn er tilstede.

ADVARSEL! For å unngå elektrisk støt eller skader på

grunn av varme, pass alltid på at støpselet er trukket ut før

LES BRUKSANVISNINGEN NØYE

• Produktet er kun beregnet for hjemmebruk

• Sørg for at ovnen kobles til husets vanlige strømnett slik ovnens

merke viser

• Nye ovner vil avgi en egen lukt når den brukes første gang. Dette gir

seg etter en kort stund og er helt ufarlig

• Sjekk at det ikke har falt rester (isopor/papp) fra innpakningen ned

ubehagelig lukt

• Unngå at ovnen blir overopphetet- må ikke tildekkes

•

over lengre tid

• Vær spesielt oppmerksom hvis ovnen er i bruk i rom hvor barn,

handikappede eller eldre oppholder seg

• Ovnen må ikke stilles opp rett under et elektrisk kontaktpunkt

• Ledningen må ikke legges under tepper av noe slag. Påse at den

ligger på en slik måte at ingen kan snuble i den

• Ovnen må ikke brukes hvis ledningen eller kontakten er skadet. Den

må ikke brukes hvis den har falt i bakken (gulvet) eller er skadet på

annen måte, slik at den ikke fungerer normalt

• Hvis ledningen blir skadet må denne bli reparert av en fagperson

for å unngå farlige situasjoner

• Unngå å bruke skjøteledning, da en slik ledning kan bli

overopphetet og muligens starte en brann

•

brukes i rom med vanlige rette gulv

Viktig sikkerhetsinformasjon

millheat.com

Model identiﬁer(s): JA1000

Item Symbol Value Unit Item Unit

Head Output

Auxiliary electricity consumption

Type of heat input, for electric storage

local space heaters only (select one)

Nominal heat output Pnom 1,00 kW No

manual heat charge control,

with integrated thermostat

Contact details Mill International AS

Grini Næringspark 10, 1361 Østerås, Norway

At nominal heat

output

At minimum heat

output

In standby mode

elmax

elmin

elSB

N/A kW

Type of heat output/room

temperature control (select one)

single stage heat output and

no room temperature control

Two or more manual stages,

no room temperature control

Yes

with mechanic thermostat

room temperature control

with electronic room

temperature control

electronic room temperature

control plus day timer

electronic room temperature

control plus week timer

room temperature control,

with presence detection

room temperature control,

with open window detection

Other control options (multiple

selections possible)

ηs36 %

Seasonal space heating

energy eﬃciency

Minimum heat output

(indicative) Pmin 0,40 kW No

manual heat charge control

with room and/or outdoor

temperature feedback

Maximum continuous

heat output Pmax,c 1,00 kW No

electronic heat charge control

with room and/or outdoor

tempe- rature feedback

fan assisted heat output

with distance control option

with adaptive start control

with working time limitation

with black bulb sensor

Seasonal energy eﬃciency

Information requirement for the electric local space heaters

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mill JA1500 - 2020 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5.06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mill JA1500 - 2020

Mill JA1500 - 2020 Additional guide - English - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mill JA1500 - 2020 Manual

Product: