789538

Mill Instant Convection heater CO2200 series Manual

9
Zoom out
Zoom in
Previous page
1/128
Next page
7
EN
Instructions electronic thermostat
Please see table on page 4 for which models that have electronic thermostats.
Control panel
See figure 5 on separate illustration sheet
1. Thermostat, output selector and timer button (applies to CO2200LEDMAX only):
i. Turn the selector to the left to decrease the temperature, and turn the selector to
the right to increase the temperature.
ii. Push the button to change the desired power level. 3 power levels.
iii. Press and hold the button for 3 seconds to activate the timer function, and
choose number of hours 024 you wish to have the timer function activated
2. Fan ON/OFF (does not apply to CO2200LEDMAX)
3. ON/OFF button
4. Power indicator — Shows whether the heater is using power or not
5. Indicates the output level
6. Indicates whether the fan is activated / timer indicator for CO2200LEDMAX
7. Desired room temperature
8. Standby indicator for CO2200LEDMAX
WARNING: BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
ATTENTION! This heater is only meant to be used as a supplementary heating source, and
must not be used without supervision
Usage electronic thermostat
1. Plug the heater into a grounded outlet.
2. Press the ON/OFF button.
3. Choose the desired power |, || or |||, by pressing the output selector. Turn the ther-
mostat to the desired temperature while looking at the display. As soon as the room
temperature drops below this level, the heater will automatically start again. When
the room has reached the desired temperature again, the heater will turn itself off.
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6. Press the fan button to start the fan (does not apply to CO2200LEDMAX). Note that
the fan is only active when the heater is heating up (when the power indicator
is on).Timer function for CO2200LEDMAX: Press and hold the timer button for 3
seconds to activate the timer function, 00 will appear in the display. Turn the timer
button to select how many hours 024 you want the timer function to be activated, 0
means no timer function. Aer selecting the number of hours, press the timer button,
or wait 15 seconds for automatic confirmation. The timer indicator will now light up.
When the timer function is o, the heater goes to standby mode, the display shows
OF and the standby indicator will light up.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill Instant Convection heater CO2200 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill Instant Convection heater CO2200 series in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mill Instant Convection heater CO2200 series

Mill Instant Convection heater CO2200 series Additional guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info