770584
10
Zoom out
Zoom in
Previous page
1/68
Next page
Power indicator for day/night thermostat
When the panel heater is using power (i.e. when it is heating), the power indicator is
lit .
Set desired temperature for day/night thermostat
Press the arrow buttons to set the desired temperature.
Day- and nighttime setback
When programming the heater for either day- or nighttime setback, the setback
period will be active from the time you register the program. Which means; if you
want to start your daytime setback at 7.30 am, you need to register the program at
7.30 am.
You only need to program the heater 1 time for daytime setback and 1 time for
nighttime setback. If you have programmed the heater, the setback programs
will be active on all 7 days (or 7 nights).
Let us say you want to program the heater for both daytime- and nighttime setback
(normally the heater is set to 23 degrees). You want the heater to do the following:
1.Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17
degrees
2.Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18
degrees
How to activate daytime setback
1.Tuesday 7.30 am you go to the heater and press on the heater’s control panel.
2. d” will be visible in the display. Use the + and - buttons to set what day it is today when
you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not
programming the heater for the various days. This is simply to tell the heater what
day it is when you are programming the heater.
5.The daytime setback will now be active from 7.30 am to 2:30 pm every day.
Setback temperature is 17 degrees.
* Control light is green when the heater is in an active setback period. The
control light is red when the setback period is inactive but programmed.
Select 2 for Tuesday. Confirm by pressing .
for daytime setback. Confirm by pressing .
3. “C” will flash in the display. Use the + and - buttons to set 17 as the desired temperature
period (meaning it will be active from 7.30 am to 2:30 pm). Confirm by pressing .
4. “H” will flash in the display. Use the + and - buttons to set 7 hours as desired setback
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill IB700DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill IB700DN in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 11.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info