626780
11
Zoom out
Zoom in
Previous page
1/168
Next page
9
EN
EXAMPLE:
Let us say you want to program the heater for both daytime- and nighttime setback (normally
the heater is set to 23 degrees). ‚bu want the heater to do the following:
1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17 degrees.
2. Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18
degrees.
How to activate daytime setback
See figure 10 on separate illustration sheet
1. Tuesday 7.30 am you go to the heater and presson the heater‘s control panel.
2. “d” will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (1= Monday, 2 = Tuesday etc.) ‚bu are not pro-
gramming the heater for the various days. This is simply to tell the heater what day it is
when you are programming the heater. Select 2 for Tuesday. Confirm by pressing
3. “C” will flash in the display. Use the + and - buttons to set 17 as the desired temperatu-
re for daytime setback. Confirm by pressing
4. “H” will flash in the display. Use the + and - buttons to set 7 hours as desired setback
period (meaning it will be active from 7.30 am to 230 pm). Confirm by pressing
5. The daytime setback will now be active from 7.30 am to 230 pm every day. Setback
temperature is 17 degrees.
*Control lightis green when the heater is in an active setback period. The control light is
red when the setback period is inactive but programmed.
How to activate nighttime setback
See figure 11 on separate illustration sheet
1. Tuesday 10.00 pm you go to the heater and presson the heater‘s control panel.
2. “d” will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (l=Monday), 2 = Tuesday etc.). You are not
programming the heater for various days. This is simply to tell the heater what day it is
when you are programming the heater. Select 2 for Tuesday. Confirm by pressing
3. “C” will flash in the display. Use the + and - buttons to set 18 as the desirectfemperatu-
re for nighttime setback. Confirm by pressing
4. “H” will flash in the display. Use the + and - buttons to set 8 hours as desired setback
period (meaning it will be active from 22.00 pm to 6.00 am). Confirm by pressing
5. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
*Control light(! is green when the heater is in an active setback period. The control light is red
when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and you will
have to do this over again.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill IB600DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill IB600DN in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mill IB600DN

Mill IB600DN Additional guide - English - 2 pages

Mill IB600DN Usermanual and installation guide - English - 15 pages

Mill IB600DN Usermanual and installation guide - German - 17 pages

Mill IB600DN Usermanual and installation guide - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info