789530

Mill HT500 Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
EN 7 millnorway.com
Instructions
Control panel
1. Button to increase the temperature
2. ON / Standby
3. Button to lower the temperature
4. Timer
5. LED display
6. Fan speed (low / high)
ATTENTION! This heater is only meant to be used as a supplementary
heating source, and must not be used without supervision.
Use
1. Insert the plug into a grounded electrical outlet.
NOTE! The fan heater must be placed in an upright position so that the control panel is at the top.
Minimum distance from the bottom of the fan heater to the ground or other objects must be 10 cm.
The minimum distance between the sides of the heater and any walls or other objects must be 50 cm.
2. Press the ON / OFF button on the side of the heater to turn it on. The night light is activated.
3. Press the ON / Standby button on the control panel to start the heater.
4. Press Temp + to increase the temperature.
5. Press Temp– to lower the temperature.
6. To adjust the speed of the fan, press Temp + and Temp– simultaneously. You can then choose between
2 speeds low / high.
7. Press Timer to activate timer function (0-12 hours).
Timer OFF: When the fan heater is on press Timer. The display now changes from temperature to hours.
Keep pressing the Timer button until you have reached the desired number of hours you want the fan
heater to be activated before it switches off automatically. You have the choice between 0 to 12 hours.
Timer ON: When the heater is in standby press Timer. The display now changes from temperature to
hours. Keep pressing the Timer button until you have reached the desired time for when you want the
fan heater to switch on automatically. You have the choice between 0 to 12 hours.
Deactivating the timer: Press the timer button until the number 0 appears on the display. The timer
function is now closed.
8. Press the ON / Standby button when you want to turn off the heater. This will stop the heating function,
but the fan will continue to blow air for about 1 minute for the heater to cool down. The fan will then
switch off automatically. Press the OFF button on the side of the heater and pull the plug out of the
socket.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill HT500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill HT500 in the language / languages: English as an attachment in your email.

The manual is 0.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info