773926
9
Zoom out
Zoom in
Previous page
1/16
Next page
7
millheat.com
EN
Usage electronic thermostat
1. Plug the heater into a grounded outlet.
2. Press the ON/OFF button.
3. Choose the desired power |, || or |||, by pressing the output selector. Turn the
thermostat to the desired temperature while looking at the display. As soon as the
room temperature drops below this level, the heater will automatically start again.
When the room has reached the desired temperature again, the heater will turn
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
7.
extremely hot.
8. If the temperature sensor is not functioning as it should, will be shown on
distributor or importer.
9.
for a longer period of time, pull out the plug.
Temperature calibration
SG2000LED/SG2000LED BLACK/SG2000GLASS
It may occur deviation between the temperature registered by the heater and the
actual temperature in the room. This can be caused by several reasons, however, the
most common is that the heater is placed in a fair distance from where you usually
reside. When you set the temperature to for example 22 degrees, it is only natural that
you expect the same temperature where your sofa is placed for instance. However,
the temperature sensor is placed on the product itself, and therefore a deviation in
temperature may occur. To adjust this, all Mill heaters are equipped with a calibration
function, which enables you to adjust the temperature registered by the heater. N.B!
The room must have achieved a stable temperature before any calibration.
6. Press the fan button to start the fan (does not apply to CO2200LEDMAX). Note that
the fan is only active when the heater is heating up (when the power indicator is on).
Timer function for CO2200LEDMAX: Press and hold the timer button for 3 seconds to
activate the timer function, 00 will appear in the display. Turn the timer button to select
how many hours 0-24 you want the timer off, 0 means no timer function. Aer selecting
the number of hours, press the timer button, or wait 15 seconds for automatic confirmation.
The timer indicator will now light up. When the timer function is off, the heater goes to standby
mode, the display shows OF and the standby indicator will light up.
Press and hold for 5 seconds and use + or – to set the actual temperature
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill CO2200LED MAX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill CO2200LED MAX in the language / languages: English as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mill CO2200LED MAX

Mill CO2200LED MAX User Manual - German - 11 pages

Mill CO2200LED MAX User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info