773906

Mill AB-H1500WIFI Manual

7
Zoom out
Zoom in
Previous page
1/116
Next page
5
EN
millheat.com
Assembly
1. The heater should be unplugged during assembly or disassembly.
2. Attach the legs to the brackets by tightening 2 screws into each bracket.
3. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
4. Two screws must be fastened on each foot bracket.
5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
See figure 3 on separate illustration sheet
“Open window” function
The heater has an «open window» function that is activated instantly when it registers a
sudden drop in temperature with more than 2 degrees Celsius in 2 minutes. The heater
will automatically stop heating and FO will be visible in the display of the heater.
The heater will automatically start heating again aer 10 minutes (the display switch
from FO to desired room temperature).
Temperature calibration
It may occur deviation between the temperature registered by the heater and the
actual temperature in the room. This can be caused by several reasons, however, the
most common is that the heater is placed in a fair distance from where you usually
reside. When you set the temperature to for example 22 degrees Celsius, it is only natural
that you expect the same temperature where your sofa is placed for instance. However,
the temperature sensor is placed on the product itself, and therefore a deviation in
temperature may occur. To adjust this, all Mill heaters are equipped with a calibration
function, which enables you to adjust the temperature registered by the heater.
N.B! The room must have achieved a stable temperature before any calibration.
See figure 4 on separate illustration sheet
Press 2 times and use + or – to set the actual tempeature observed in the room.
Confirm with or wait 15 seconds for automatic confirmation.
Resetting the heater
Turn o the heater’s main switch. Press and hold while you turn on the heater's
main switch.
See figure 6 on separate illustration sheet
Power indicator
When the heater is using power (i.e. when it is heating), the power indicator is lit .
See figure 5 on separate illustration sheet
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mill AB-H1500WIFI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mill AB-H1500WIFI in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 8.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info