651863
99
Zoom out
Zoom in
Previous page
1/124
Next page
Installation and connection
99
Connection to the water supply
The washer-dryer should be connected
to the mains water supply in accord-
ance with current local and national
safety regulations. The German author-
ities do not require it to have a non-re-
turn valve as the washing machine has
been designed to comply with DIN reg-
ulations.
The machine is designed to operate
with a flow pressure of between 100
and 1000kPa. If it is higher than
1000kPa it is essential to fit a pressure
reducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" threaded union. The stopcock
should be fitted by a qualified plumber.
The screw connection is subject
to mains water pressure.
Turn on the stopcock slowly and
check for leaks. Correct the position
of the washer and union if appropri-
ate.
The washer-dryer is not suitable for
connection to a hot water supply.
Maintenance
Only use a genuine Miele hose that has
been tested to withstand pressure of at
least 14,000 kPa should you ever need
a replacement.
The dirt filter in the open end of the
inlet hose must not be removed.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele WTZH130 WPM PowerWash 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele WTZH130 WPM PowerWash 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info