Manual Miele WTZH130 WPM PowerWash 2.0 (page 94 of 124) (English)

651863

Zoom out

Zoom in

1/124

Installation and connection

Installation surface

A concrete floor is the most suitable in-

stallation surface for this machine, be-

ing far less prone to vibration during the

spin cycle than wooden floorboards or

a carpeted surface.

Please note:

 The washer-dryer must be level and

securely positioned.

 To avoid vibrations during spinning

the washer-dryer must not be in-

stalled on soft floor coverings.

If installing on a wooden joist floor:

 We recommend installing the ma-

chine on a plywood base at least 59

x60x 3 cm). The base should span

several joists and be bolted to the

joist and not only the floorboards.

Check for the presence of pipes and

cables first.

Tip: If possible, install the machine in a

corner, as this is usually the most stable

part of the floor.

 If the washer-dryer is installed on

an existing on-site plinth (concrete or

brick), there is a danger of the ma-

chine falling off the plinth during the

spin cycle.

The washer-dryer must be secured

with an MTS floor mounting kit (avail-

able from Miele).

Installing the washer-dryer

Hold the washer-dryer by the front feet

and by the edge of the lid where it pro-

trudes to the rear of the machine.

 Danger of slippage during spin-

ning.

The machine feet and installation

surface must be dry.

Remove the transit bars

 Remove the left and right covers.

1. Pull on the attached stopper and

2. then use a screwdriver to release the

catches at the top and bottom.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Miele WTZH130 WPM PowerWash 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Miele WTZH130 WPM PowerWash 2.0 Manual

Product: