651863
87
Zoom out
Zoom in
Previous page
1/124
Next page
What to do if...
87
Unsatisfactory drying results
Problem Cause and remedy
The laundry is too damp
after drying and
Check load appears in the
display.
The load is too small for the electronics to correctly
calculate the residual moisture content.
Start the programme again and instead of a drying
level select a Timed drying programme.
In future use a Timed drying programme for small
amounts of laundry.
During spinning, the laundry formed a ring in the drum
because the laundry was distributed unevenly.
The laundry formed a ring during the thermospin be-
cause it was too damp or because the spin speed
was set too high.
Open the door and loosen the laundry.
Start the drying programme again with a lower
spin speed, or select Timed drying instead of a
drying level.
The laundry feels damp
after drying.
TheSteam smoothing option has been selected.
Unload the laundry and place it on hangers to fin-
ish drying.
Warm laundry can feel damp.
Spread the laundry out to cool it down.
The laundry is too damp
or too dry after a drying
cycle.
The desired residual moisture level is between two
drying stages.
Change the level of drying as described in "Set-
tings", "Drying levels".
There is still water in
the drum after drying.
There is a blockage in the water outlet.
Clean the drain filters and the drain pumps as de-
scribed in "Opening the door in the event of a
blocked drain outlet and/or power failure" and
check the height of the drainage point.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele WTZH130 WPM PowerWash 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele WTZH130 WPM PowerWash 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info